|Individual Submission||L. Dusseault|
|Intended status: Informational||J. Snell|
|Expires: February 20, 2008||August 19, 2007|
PATCH Method for HTTP
By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress”.
The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html.
This Internet-Draft will expire on February 20, 2008.
Copyright © The IETF Trust (2007). All Rights Reserved.
Several applications extending HTTP require a feature to do partial resource modification. Existing HTTP functionality only allows a complete replacement of a document. This proposal adds a new HTTP method, PATCH, to modify an existing HTTP resource.
This specification defines the new HTTP 1.1 [RFC2616] method PATCH that is used to apply partial modifications to a HTTP resource.
A new method is necessary to improve interoperability and prevent errors. The PUT method is already defined to overwrite a resource with a complete new body, and can not be reused to do partial changes. Otherwise, proxies and caches and even clients and servers may get confused as to the result of the operation.
In this document, the key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" are to be interpreted as described in [RFC2119].
The PATCH method requests that a set of changes described in the request entity be applied to the resource identified by the Request-URI. The set of changes is represented in a format called a "patch document" identified by a media type. PATCH is neither safe or idempotent as defined by [RFC2616] Section 9.1.
The difference between the PUT and PATCH requests is reflected in the way the server processes the enclosed entity to modify the resource identified by the Request-URI. In a PUT request, the enclosed entity is considered to be a modified version of the resource stored on the origin server and the client is requesting that stored version be replaced. With PATCH, however, the enclosed entity contains a set of instructions describing how a resource currently residing on the origin server should be modified to produce a new version. The changes described by the entity MAY result in the creation of one or more new resources on the server, however it is not intended that the body of the PATCH request be used as the content of such resources.
The server MUST always apply the entire set of changes atomically and never provide (e.g. in response to a GET during this operation) a partially-modified representation. If the entire patch document cannot be successfully applied then the server MUST fail the entire request, applying none of the changes. The determination of what constitutes a successful PATCH can vary depending on the patch document and the type of resource being modified. The actual method for determining how to apply the patch document to the resource is defined entirely by the origin server. See Error Handling in section 2.2 for details on status codes and possible error conditions.
If the request passes through a cache and the Request-URI identifies one or more currently cached entities, those entries SHOULD be treated as stale. Responses to this method are not cacheable, unless the response includes appropriate Cache-Control or Expires header fields or the response uses the 209 Content Returned status code as defined in Section 3. The 303 (See Other) response can be used to direct the user agent to retrieve a cacheable resource.
Collisions from multiple requests are more dangerous than PUT collisions, because a patch document that is not operating from a known base point may corrupt the resource. Clients wishing to apply a patch document to a known entity can first acquire the strong ETag of the resource to be modified, and use that Etag in the If-Match header on the PATCH request to verify that the resource is still unchanged. If a strong ETag is not available for a given resource, the client can use If-Unmodified-Since as a less-reliable safeguard.
It is RECOMMENDED that Servers provide strong ETags for all resources for which PATCH is supported.
If a PATCH request contains any entity-headers the server does not understand, the server MUST return a 501 (Not Implemented) response. A server that understands a particular entity-header can choose to ignore it; however, doing so can produce results that are unexpected or unintended by the client. All entity-headers contained in the request apply only to the contained patch document and MUST NOT be applied to the resource being modified.
If the Request-URI identifies a resource with multiple alternate representations, the server can choose to respond in a variety of ways. For instance, the server can decide which representation to alter and might even be able to change them all consistently depending on the patch format. A particular patch document might be able to identify specific representations to modify or might be capable of describing changes to multiple representations. If the server cannot choose a representation, it can reject the request with an error or the server can choose to redirect the request (e.g. using 301 Moved Permanently or 302 Found), in which case the user agent makes its own decision regarding whether or not to proceed with the request.
Clients are advised to take caution when sending multiple PATCH requests, or sequences of requests that include PATCH, over a pipelined connection as there are no guarantees that pipelined requests will be processed by the server in the same order in which the client sends them. Such sequences of requests can be made safer by using conditional request mechanisms such as If-Match. See [RFC2616] Section 184.108.40.206 for additional details regarding pipelining and non-idempotent requests.
There is no guarantee that a resource can be modified with PATCH. Further, it is expected that different patch document formats will be appropriate for different types of resources and that no single format will be appropriate for all types of resources. Therefore, there is no single default patch document format that implementations are required to support. Servers MUST ensure that a received patch document is appropriate for the type of resource identified by the Request-URI.
PATCH /file.txt HTTP/1.1 Host: www.example.com Content-type: application/example If-Match: "e0023aa4e" Content-Length: 100 [description of changes]
This example illustrates use of a hypothetical patch document on an existing text file.
Successful PATCH response to existing text file
HTTP/1.1 204 No Content ETag: "e0023aa4f" Content-MD5: Q2hlY2sgSW50ZWdyaXR5IQ==
There are several known conditions under which a PATCH request can fail.
Other HTTP status codes can also be used under the appropriate circumstances.
The entity body of error responses SHOULD contain enough information to communicate the nature of the error to the client. The content-type of the response entity can vary across implementations.
A server can advertise its support for the PATCH method by adding it to the listing of allowed methods in the "Allow" OPTIONS response header defined in HTTP/1.1.
Clients also need to know whether the server supports specific patch document formats, so this specification introduces a new response header "Accept-Patch" used to specify the patch document formats accepted by the server. "Accept-Patch" MUST appear in the OPTIONS response for any resource that supports the use of the PATCH method. The presence of the "Accept-Patch" header in response to any method is an implicit indication that PATCH is allowed on the resource identified by the Request-URI.
Accept-Patch = "Accept-Patch" ":" #( media-range )
The Accept-Patch header specifies a listing of media ranges as defined by [RFC2616], Section 14.1. Note that, unlike the HTTP Accept request header, the Accept-Patch header does not use quality factors.
[request] OPTIONS /example/buddies.xml HTTP/1.1 Host: www.example.com [response] HTTP/1.1 200 OK Allow: GET, PUT, POST, OPTIONS, HEAD, DELETE, PATCH Accept-Patch: application/example, text/example
The examples show a server that supports PATCH generally using two hypothetical patch documents.
The 209 "Content Returned" status code can be used to indicate that a response is equivalent to what would have been returned with a 200 status code response to a GET sent to the URI immediately following the successful completion of the request.
The Prefer request-header is used to indicate that particular server behaviors are preferred, but not required, by the client. Prefer is similar in nature to the Expect header defined by [RFC2616] with the exception that servers are allowed to ignore a clients stated preference.
Prefer = "Prefer" ":" 1#preference preference = "no-content" | "content-returned" | preference-extension preference-extension = token [ "=" ( token | quoted-string ) *prefer-params ] prefer-params = ";" token [ "=" ( token | quoted-string ) ]
This header is defined with an extensible syntax to allow for future extensions. A server that does not understand or is unable to comply with any of the preference values in the Prefer field of a request MUST ignore those values and MUST NOT stop processing or signal an error.
Comparison of preference values is case-insensitive for unquoted tokens and is case-sensitive for quoted-string preference-extensions.
The Prefer mechanism is hop-by-hop: that is, an HTTP proxy MAY choose to honor a preference even if the origin server does not. However, the Prefer request-header itself is end-to-end; it MUST be forwarded if the request is forwarded.
The "no-content" preference token indicates that the client prefers that the server respond to a successful request using the 204 No Content status code as defined in Section 10.2.5 of [RFC2616].
The "content-returned" preference token indicates that the client prefers that the server respond to a successful request using the 209 Content Returned status code as defined in Section 3.
When a server chooses to ignore a preference value specified in the Prefer header, it MAY include a Warning header field in the response message using the "601 Preference Ignored" warn code. The warning text SHOULD specify the specific preference tokens that were ignored.
For instance, the following example notifies the client that the "content-returned" preference token was intentionally ignored by the server.
HTTP/1.1 204 No Content Warning: 601 origin "content-returned"
When an HTTP proxy chooses to honor a preference even when the origin server does not, it SHOULD include a Warning header field in the response message using the "602 Preference Honored" warn code. The warning text SHOULD specify the specific preference tokens that were honored.
For instance, the following example notifies the client that the "no-content" preference token was intentionally ignored by the origin server, however a proxy chose to honor the preference and return the prefered status code.
HTTP/1.1 204 No Content Warning: 601 origin "no-content" Warning: 602 proxy "no-content"
Use of the 602 warn-code is restricted to HTTP proxies and caches. HTTP origin servers MUST NOT use the 602 warn-code.
The 'Accept-Patch' response header should be added to the permanent registry (see [RFC3864]).
Header field name: Accept-Patch Applicable Protocol: HTTP Status: standard Author/Change controller: IETF Specification document: this specification
This specification defines the 209 Content Returned status code (Section 3) to be updated in the registry at <http://www.iana.org/assignments/http-status-codes>.
The security considerations for PATCH are nearly identical to the security considerations for PUT. In addition, one might be concerned that a document that is patched might be more likely to be corrupted, but that concern can be addressed through the use of mechanisms such as conditional requests using ETags and the If-Match request header.
Sometimes an HTTP intermediary might try to detect viruses being sent via HTTP by checking the body of the PUT/POST request or GET response. The PATCH method complicates such watch-keeping because neither the source document nor the patch document might be a virus, yet the result could be. This security consideration is not materially different from those already introduced by byte-range downloads, downloading patch documents, uploading zipped (compressed) files and so on.
Individual patch documents will have their own specific security considerations that will likely vary depending on the types of resources being patched. The considerations for patched binary resources, for instance, will be different than those for patched XML documents.
|[RFC2119]||Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels”, BCP 14, RFC 2119, March 1997.|
|[RFC2616]||Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1”, RFC 2616, June 1999.|
|[RFC3864]||Klyne, G., Nottingham, M., and J. Mogul, “Registration Procedures for Message Header Fields”, BCP 90, RFC 3864, September 2004.|
|[RFC4918]||Dusseault, L., “HTTP Extensions for Web Distributed Authoring and Versioning (WebDAV)”, RFC 4918, June 2007.|
Open Source Application Foundation
2064 Edgewood Dr.
Palo Alto, CA 94303
PATCH is not a new concept, it first appeared in HTTP in drafts of version 1.1 written by Roy Fielding and Henrik Frystyk.
Thanks to Adam Roach, Chris Sharp, Julian Reschke, Geoff Clemm, Scott Lawrence, Jeffrey Mogul, Roy Fielding, Greg Stein, Jim Luther, Alex Rousskov, Jamie Lokier, Joe Hildebrand, Mark Nottingham and Michael Balloni for review and advice on this document.
OPTIONS support: removed "Patch" header definition and used Allow and new "Accept-Patch" headers instead.
Supported delta encodings: removed vcdiff and diffe as these do not have defined MIME types and did not seem to be strongly desired.
PATCH method definition: Clarified cache behavior.
Removed references to XCAP - not yet a RFC.
Fixed use of MIME types (this "fix" now obsolete)
Explained how to use MOVE or COPY in conjunction with PATCH, to create a new resource based on an existing resource in a different location.
Clarified that MOVE and COPY are really independent of PATCH.
Clarified when an ETag must change, and when Last-Modified must be used.
Clarified what server should do if both Content-Type and IM headers appear in PATCH request.
Filled in missing reference to DeltaV and ACL RFCs.
Stopped using 501 Unsupported for unsupported delta encodings.
Clarified what a static resource is.
Refixed use of MIME types for patch formats.
Limited the scope of some restrictions to apply only to usage of required diff format.
Various typographical, terminology consistency, and other minor clarifications or fixes.
Moved paragraphs on ACL and RFC3229 interoperability to new section.
Added security considerations.
Added IANA considerations, registration of new namespace, and discontinued use of "DAV:" namespace for new elements.
Added example of error response.
Due to various concerns it didn't seem likely the application/gdiff registration could go through so switching to vcdiff as required diff format, and to RFC3229's approach to specifying diff formats, including use of the IM header.
Clarified what header server MUST use to return MD5 hash.
Reverted to using 501 Unsupported for unsupported delta encodings.
The reliance on RFC 3229 defined patch documents has been factored out in favor of delta encodings identified by MIME media type.
The required use of DeltaV-based error reporting has been removed in favor of using basic HTTP status codes to report error conditions.
The Accept-Patch response header has been redefined as a listing of media-ranges, similar to the Accept request header.
Added James Snell as a co-author.
Terminology change from "delta encoding" to "patch document"
Added clarification on the safety and idempotency of PATCH
Updated the caching rules of PATCH responses
200 responses MUST include a representation of the modified resource. 204 responses are used to indicate successful response without returning a representation.
Suggest using 422 Unprocessable Entity to indicate that a properly formatted patch document cannot be processed
Clarify the use of 412 and 409 to indicate concurrent and conflicting resource modifications.
Added registration for the Accept-Patch header.
Relaxed the requirements for the use of If-Match and If-Unmodified-Since.
Add language that clarifies the difference between PUT and PATCH.
Add language that clarifies the issues with PATCH and Content Negotiation.
Use of Accept-Patch on any response implies that PATCH is supported.
Add language advising caution when pipelining PATCH requests.
Addition of the 209 Content Returned status code
Addition of the Prefer header field mechanism
Removed the paragraph discussing the use of 200+Content-Location. This is replaced by the 209 Content Returned status code.
The RFC Editor should remove this section and the Changes section.
There are several outstanding issues with the Prefer section:
Copyright © The IETF Trust (2007).
This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an “AS IS” basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at email@example.com.