WebDAV SEARCH greenbytes GmbH
Salzmannstrasse 152 MuensterNW48159 Germany +49 251 2807760 +49 251 2807761 julian.reschke@greenbytes.de http://greenbytes.de/tech/webdav/
Oracle Corporation
600 Oracle Parkway, M/S 6op3 RedwoodshoresCA94065 +1 650 506 5441 Surendra.Reddy@oracle.com
Intelligent Markets
410 Jessie Street 6th floor San FranciscoCA94103 jrd3@alum.mit.edu
FileNET Corp.
3565 Harbor Blvd. Costa MesaCA92626 +1 714 327 3403 ababich@filenet.com
WEBDAV DASL Working Group This document specifies a set of methods, headers, properties and content-types composing WebDAV SEARCH, an application of the HTTP/1.1 protocol to efficiently search for DAV resources based upon a set of client-supplied criteria. Distribution of this document is unlimited. Please send comments to the Distributed Authoring and Versioning (WebDAV) DASL mailing list at www-webdav-dasl@w3.org, which may be joined by sending a message with subject "subscribe" to www-webdav-dasl-request@w3.org. Discussions of the WebDAV DASL mailing list are archived at URL: http://www.w3.org/pub/WWW/Archives/Public/www-webdav-dasl/.
This document defines WebDAV SEARCH, an application of HTTP/1.1 forming a lightweight search protocol to transport queries and result sets and allows clients to make use of server-side search facilities. It is based on the expired draft for WebDAV DASL . describes the motivation for DASL. DASL will minimize the complexity of clients so as to facilitate widespread deployment of applications capable of utilizing the DASL search mechanisms. DASL consists of: the SEARCH method, the DASL response header, the DAV:searchrequest XML element, the DAV:queryschema property, the DAV:basicsearch XML element and query grammar, and the DAV:basicsearchschema XML element. For WebDAV-compliant servers, it also defines a new live property DAV:supported-query-grammar-set.
DASL relies on the resource and property model defined by . DASL does not alter this model. Instead, DASL allows clients to access DAV-modeled resources through server-side search.
This draft uses the terms defined in , , and .
The augmented BNF used by this document to describe protocol elements is exactly the same as the one described in Section 2.1 of . Because this augmented BNF uses the basic production rules provided in Section 2.2 of , those rules apply to this document as well. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT" "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in . When an XML element type in the "DAV:" namespace is referenced in this document outside of the context of an XML fragment, the string "DAV:" will be prefixed to the element type. Note that this draft currently defines elements and properties in the WebDAV namespace "DAV:", which it shouldn't do as it isn't a work item of the WebDAV working group. The reason for this is the desire for some kind of backward compatibility to the expired DASL drafts and the assumption that the draft may become an official RFC submission of the WebDAV working group at a later point of time. Similarily, when an XML element type in the namespace "http://www.w3.org/2001/XMLSchema" is referenced in this document outside of the context of an XML fragment, the string "xs:" will be prefixed to the element type.
One can express the basic usage of DASL in the following steps: The client constructs a query using the DAV:basicsearch grammar. The client invokes the SEARCH method on a resource that will perform the search (the search arbiter) and includes a text/xml or application/xml request entity that contains the query. The search arbiter performs the query. The search arbiter sends the results of the query back to the client in the response. The server MUST send an entity that matches the PROPFIND response.
The client invokes the SEARCH method to initiate a server-side search. The body of the request defines the query. The server MUST emit an entity matching the PROPFIND response. The SEARCH method plays the role of transport mechanism for the query and the result set. It does not define the semantics of the query. The type of the query defines the semantics.
The client invokes the SEARCH method on the resource named by the Request-URI.
The Request-URI identifies the search arbiter. Any HTTP resource may function as search arbiter. It is not a new type of resource (in the sense of DAV:resourcetype as defined in ), nor does it have to be a WebDAV-compliant resource. The SEARCH method defines no relationship between the arbiter and the scope of the search, rather the particular query grammar used in the query defines the relationship. For example, the FOO query grammar may force the request-URI to correspond exactly to the search scope.
The server MUST process a text/xml or application/xml request body, and MAY process request bodies in other formats. See for guidance on packaging XML in requests. If the client sends a text/xml or application/xml body, it MUST include the DAV:searchrequest XML element. The DAV:searchrequest XML element identifies the query grammar, defines the criteria, the result record, and any other details needed to perform the search.
<!ELEMENT searchrequest ANY >
The DAV:searchrequest XML element contains a single XML element that defines the query. The name of the query element defines the type of the query. The value of that element defines the query itself.
If the server returns 207 (Multistatus), then the search proceeded successfully and the response MUST match that of a PROPFIND. The results of this method SHOULD NOT be cached. There MUST be one DAV:response for each resource that matched the search criteria. For each such response, the DAV:href element contains the URI of the resource, and the response MUST include a DAV:propstat element. Note that for each matching resource found there may be multiple URIs within the search scope mapped to it. In this case, a server SHOULD report all of these URIs. Clients can use the live property DAV:resource-id defined in to identify possible duplicates. In addition, the server MAY include DAV:response items in the reply where the DAV:href element contains a URI that is not a matching resource, e.g. that of a scope or the query arbiter. Each such response item MUST NOT contain a DAV:propstat element, and MUST contain a DAV:status element (unless no property was selected).
A response MAY include more information than PROPFIND defines so long as the extra information does not invalidate the PROPFIND response. Query grammars SHOULD define how the response matches the PROPFIND response.
This example demonstrates the request and response framework. The following XML document shows a simple (hypothetical) natural language query. The name of the query element is natural-language-query in the XML namespace "http://example.com/foo". The actual query is "Find the locations of good Thai restaurants in Los Angeles". For this hypothetical query, the arbiter returns two properties for each selected resource.
>> Request: SEARCH / HTTP/1.1 Host: example.org Content-Type: application/xml Content-Length: xxx <?xml version="1.0" encoding="UTF-8"?> <D:searchrequest xmlns:D="DAV:" xmlns:F="http://example.com/foo"> <F:natural-language-query> Find the locations of good Thai restaurants in Los Angeles </F:natural-language-query> </D:searchrequest>
>> Response: HTTP/1.1 207 Multi-Status Content-Type: text/xml; charset="utf-8" Content-Length: xxx <?xml version="1.0" encoding="UTF-8"?> <D:multistatus xmlns:D="DAV:" xmlns:R="http://example.org/propschema"> <D:response> <D:href>http://siamiam.test/</D:href> <D:propstat> <D:prop> <R:location>259 W. Hollywood</R:location> <R:rating><R:stars>4</R:stars></R:rating> </D:prop> </D:propstat> </D:response> </D:multistatus>
A server MAY limit the number of resources in a reply, for example to limit the amount of resources expended in processing a query. If it does so, the reply MUST use status code 207, return a DAV:multistatus response body and indicate a status of 507 (Insufficient Storage) for the search arbiter URI. It SHOULD include the partial results. I believe the same response body that contains the first N <DAV:response> elements should also contain a *different* element stating that the results were incomplete and the result set was truncated by the server. There may also be a need to report that the results were incomplete and the result set was truncated at the choice of the client (isn't there a limit set in the client request?) That's important so the client knows the difference between receiving 10 results because there were >10 but only 10 were asked for, and receiving 10 results because there were only exactly 10 results and it just happens that 10 were asked for. I agree that this could be useful, but I think this issue should be consolidated with issue JW5 (see below), which proposes that DASL basicsearch ought to have a way for client to request additional result sets. It should be moved because there is little or no value in allowing a client to distinguish between the case where "N results were requested, and there are exactly N available" and "N results were requested, and there are more than N available" if there is no way for client to get the next batch of results. Feedback from interim WG meeting: agreement that marshalling should be rewritten and backwards compatibility is not important. Proposal: extend DAV:multistatus by a new child element that indicates (1) the range that was returned, (2) the total number of results and (3) a URI identifying the result (for resubmission when getting the "next" results). Such as 
<multistatus xmlns='DAV:'>
  <search-result>
    <href>...identifier for result set...</href>
    <total><-- number of results --></total>
    <start><-- 1-based index of 1st result --></start>
    <length><-- size of result set returned --></length>
    <partial-result/><-- indicates that this is a partial result -->
  </search-result>
  ...response elements for search results...
</multistatus>
The example below would then translate to: 
HTTP/1.1 207 Multistatus
Content-Type: text/xml; charset="utf-8"
Content-Length: xxx

<?xml version="1.0" encoding="utf-8"?>
<D:multistatus xmlns:D="DAV:">
  <D:search-result>
    <D:partial-result/>
  </D:search-result>
  <D:response>
    <D:href>http://www.example.net/sounds/unbrokenchain.au</D:href>
    <D:propstat>
      <D:prop/>
      <D:status>HTTP/1.1 200 OK</D:status>
    </D:propstat>
  </D:response>
  <D:response>
    <D:href>http://tech.mit.test/archive96/photos/Lesh1.jpg</D:href>
    <D:propstat>
      <D:prop/>
      <D:status>HTTP/1.1 200 OK</D:status>
    </D:propstat>
  </D:response>
</D:multistatus>
Q: do we need all elements, in particular start and length? When a result set is truncated, there may be many more resources that satisfy the search criteria but that were not examined. If partial results are included and the client requested an ordered result set in the original request, then any partial results that are returned MUST be ordered as the client directed. Note that the partial results returned MAY be any subset of the result set that would have satisfied the original query.
>> Request: SEARCH / HTTP/1.1 Host: example.net Content-Type: text/xml; charset="utf-8" Content-Length: xxx ... the query goes here ...
>> Response: HTTP/1.1 207 Multistatus Content-Type: text/xml; charset="utf-8" Content-Length: xxx <?xml version="1.0" encoding="utf-8"?> <D:multistatus xmlns:D="DAV:"> <D:response> <D:href>http://www.example.net/sounds/unbrokenchain.au</D:href> <D:propstat> <D:prop/> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://tech.mit.test/archive96/photos/Lesh1.jpg</D:href> <D:propstat> <D:prop/> <D:status>HTTP/1.1 200 OK</D:status> </D:propstat> </D:response> <D:response> <D:href>http://example.net</D:href> <D:status>HTTP/1.1 507 Insufficient Storage</D:status> <D:responsedescription xml:lang="en"> Only first two matching records were returned </D:responsedescription> </D:response> </D:multistatus>
If an error occurred that prevented execution of the query, the server MUST indicate the failure with the appropriate status code and SHOULD include a DAV:multistatus element to point out errors associated with scopes. 400 Bad Request. The query could not be executed. The request may be malformed (not valid XML for example). Additionally, this can be used for invalid scopes and search redirections. 422 Unprocessable entity. The query could not be executed. If a application/xml or text/xml request entity was provided, then it may have been well-formed but may have contained an unsupported or unimplemented query operator.
A client may submit a scope that the arbiter may be unable to query. The inability to query may be due to network failure, administrative policy, security, etc. This raises the condition described as an "invalid scope". To indicate an invalid scope, the server MUST respond with a 400 (Bad Request). The response includes a body with a DAV:multistatus element. Each DAV:response in the DAV:multistatus identifies a scope. To indicate that this scope is the source of the error, the server MUST include the DAV:scopeerror element.
>> Response: HTTP/1.1 400 Bad-Request Content-Type: text/xml; charset="utf-8" Content-Length: xxx <?xml version="1.0" encoding="UTF-8"?> <d:multistatus xmlns:d="DAV:"> <d:response> <d:href>http://www.example.com/X</d:href> <d:status>HTTP/1.1 404 Object Not Found</d:status> <d:scopeerror/> </d:response> </d:multistatus>
Marshalling a BAD REQUEST with an (extended) multistatus body seems to be a weird approach. Should be resolved by finally adopting the RFC3253 error marshalling. Funny enough, Roy Fielding's feedback on a related issue indicates that this may be the absolutely right thing to do. Needs coordination with RFC2518bis activity.
Servers MUST support discovery of the query grammars supported by a search arbiter resource. Clients can determine which query grammars are supported by an arbiter by invoking OPTIONS on the search arbiter. If the resource supports SEARCH, then the DASL response header will appear in the response. The DASL response header lists the supported grammars. Servers supporting the WebDAV extensions and/or MUST also report SEARCH in the live property DAV:supported-method-set for all search arbiter resources and support the live property DAV:supported-query-grammar-set as defined in .
The OPTIONS method allows the client to discover if a resource supports the SEARCH method and to determine the list of search grammars supported for that resource. The client issues the OPTIONS method against a resource named by the Request-URI. This is a normal invocation of OPTIONS defined in . If a resource supports the SEARCH method, then the server MUST list SEARCH in the OPTIONS response as defined by . DASL servers MUST include the DASL header in the OPTIONS response. This header identifies the search grammars supported by that resource.
>> Response: DASLHeader = "DASL" ":" Coded-URL-List Coded-URL-List : Coded-URL [ "," Coded-URL-List ] Coded-URL ; defined in section 9.4 of [RFC2518]
The DASL response header indicates server support for a query grammar in the OPTIONS method. The value is a URI that indicates the type of grammar. Note that although the URI can be used to identify each supported search grammar, there is not necessarily a direct relationship between the URI and the XML element name that can be used in XML based SEARCH requests (the element name itself is identified by it's namespace name (a URI reference) and the element's local name). This header MAY be repeated.
For example: DASL: <http://foobar.test/syntax1> DASL: <http://akuma.test/syntax2> DASL: <DAV:basicsearch> DASL: <http://example.com/foo/natural-language-query>
This WebDAV property is required for any server supporting either and/or and identifies the XML based query grammars that are supported by the search arbiter resource.
<!ELEMENT supported-query-grammar-set (supported-query-grammar*)> <!ELEMENT supported-query-grammar grammar> <!ELEMENT grammar ANY>
ANY value: a query grammar element type
This example shows that the server supports search on the /somefolder resource with the query grammars: DAV:basicsearch, http://foobar.test/syntax1 and http://akuma.test/syntax2. Note that every server MUST support DAV:basicsearch.
>> Request: OPTIONS /somefolder HTTP/1.1 Host: example.org
>> Response: HTTP/1.1 200 OK Allow: OPTIONS, GET, HEAD, POST, PUT, DELETE, TRACE, COPY, MOVE Allow: MKCOL, PROPFIND, PROPPATCH, LOCK, UNLOCK, SEARCH DASL: <DAV:basicsearch> DASL: <http://foobar.test/syntax1> DASL: <http://akuma.test/syntax2>
This example shows the equivalent taking advantage of a server's support for DAV:supported-method-set and DAV:supported-query-grammar-set.
>> Request: PROPFIND /somefolder HTTP/1.1 Host: example.org Depth: 0 Content-Type: text/xml; charset="utf-8" Content-Length: xxx <?xml version="1.0" encoding="UTF-8" ?> <propfind xmlns="DAV:"> <prop> <supported-query-grammar-set/> <supported-method-set/> </prop> </propfind>
>> Response: HTTP/1.1 207 Multi-Status Content-Type: text/xml; charset="utf-8" Content-Length: xxx <?xml version="1.0" encoding="utf-8" ?> <multistatus xmlns="DAV:"> <response> <href>http://example.org/somefolder</href> <propstat> <prop> <supported-query-grammar-set> <supported-query-grammar> <grammar><basicsearch/></grammar> </supported-query-grammar> <supported-query-grammar> <grammar><syntax1 xmlns="http://foobar.test" /></grammar> </supported-query-grammar> <supported-query-grammar> <grammar><syntax2 xmlns="http://akuma.test/"/></grammar> </supported-query-grammar> </supported-query-grammar-set> <supported-method-set> <supported-method name="COPY" /> <supported-method name="DELETE" /> <supported-method name="GET" /> <supported-method name="HEAD" /> <supported-method name="LOCK" /> <supported-method name="MKCOL" /> <supported-method name="MOVE" /> <supported-method name="OPTIONS" /> <supported-method name="POST" /> <supported-method name="PROPFIND" /> <supported-method name="PROPPATCH" /> <supported-method name="PUT" /> <supported-method name="SEARCH" /> <supported-method name="TRACE" /> <supported-method name="UNLOCK" /> </supported-method-set> </prop> <status>HTTP/1.1 200 OK</status> </propstat> </response> </multistatus>
Note that the query grammar element names marshalled as part of the DAV:supported-query-grammar-set can be directly used as element names in an XML based query.
WG January meeting feedback: QSD should be made required. Servers MAY support the discovery of the schema for a query grammar. The DASL response header and the DAV:supported-query-grammar-set property provide means for clients to discover the set of query grammars supported by a resource. This alone is not sufficient information for a client to generate a query. For example, the DAV:basicsearch grammar defines a set of queries consisting of a set of operators applied to a set of properties and values, but the grammar itself does not specify which properties may be used in the query. QSD for the DAV:basicsearch grammar allows a client to discover the set of properties that are searchable, selectable, and sortable. Moreover, although the DAV:basicsearch grammar defines a minimal set of operators, it is possible that a resource might support additional operators in a query. For example, a resource might support a optional operator that can be used to express content-based queries in a proprietary syntax. QSD allows a client to discover these operators and their syntax. The set of discoverable quantities will differ from grammar to grammar, but each grammar can define a means for a client to discover what can be discovered. In general, the schema for a given query grammar depends on both the resource (the arbiter) and the scope. A given resource might have access to one set of properties for one potential scope, and another set for a different scope. For example, consider a server able to search two distinct collections, one holding cooking recipes, the other design documents for nuclear weapons. While both collections might support properties such as author, title, and date, the first might also define properties such as calories and preparation time, while the second defined properties such as yield and applicable patents. Two distinct arbiters indexing the same collection might also have access to different properties. For example, the recipe collection mentioned above might also indexed by a value-added server that also stored the names of chefs who had tested the recipe. Note also that the available query schema might also depend on other factors, such as the identity of the principal conducting the search, but these factors are not exposed in this protocol.
Each query grammar supported by DASL defines its own syntax for expressing the possible query schema. A client retrieves the schema for a given query grammar on an arbiter resource with a given scope by invoking the SEARCH method on that arbiter with that grammar and scope and with a root element of DAV:query-schema-discovery rather than DAV:searchrequest. Marshalling: The request body MUST be DAV:query-schema-discovery element.
<!ELEMENT query-schema-discovery ANY> ANY value: XML element defining a valid query
The response body takes the form of a RFC2518 DAV:multistatus element, where DAV:response is extended to hold the returned query grammar inside a DAV:query-schema container element.
<!ELEMENT response (href, ((href*, status)|(propstat+)), query-schema?, responsedescription?) > <!ELEMENT query-schema ANY>
The content of this container is an XML element whose name and syntax depend upon the grammar, and whose value may (and likely will) vary depending upon the grammar, arbiter, and scope.
In this example, the arbiter is recipes.test, the grammar is DAV:basicsearch, the scope is also recipes.test.
>> Request: SEARCH / HTTP/1.1 Host: recipes.test Content-Type: application/xml Content-Length: xxx <?xml version="1.0"?> <query-schema-discovery xmlns="DAV:"> <basicsearch> <from> <scope> <href>http://recipes.test</href> <depth>infinity</depth> </scope> </from> </basicsearch> </query-schema-discovery>
>> Response: HTTP/1.1 207 Multistatus Content-Type: application/xml Content-Length: xxx <?xml version="1.0"?> <multistatus xmlns="DAV:"> <response> <href>http://recipes.test</href> <status>HTTP/1.1 200 OK</status> <query-schema> <basicsearchschema> <!-- (See section "Query schema for DAV:basicsearch" for the actual contents) --> </basicsearchschema> </query-schema> </response> </multistatus>
The query schema for DAV:basicsearch is defined in .
DAV:basicsearch uses an extensible XML syntax that allows clients to express search requests that are generally useful for WebDAV scenarios. DASL-extended servers MUST accept this grammar, and MAY accept other grammars. DAV:basicsearch has several components: DAV:select provides the result record definition. DAV:from defines the scope. DAV:where defines the criteria. DAV:orderby defines the sort order of the result set. DAV:limit provides constraints on the query as a whole. Where does xml:lang go in a query? What would be the *purpose* of putting xml:lang into a query? The purpose is to allow one to express queries more precisely, e.g. to distinguish between the English word "hoop" (a circular object) and Dutch "hoop" (hope). Imagine a property that holds keywords for a resource. See 4.4 in http://www.ietf.org/rfc/rfc2518.txt, and 2.12 in http://www.w3.org/TR/REC-xml I think this would be an interesting feature, but it seems to be extremely hard to implement.
So assuming a query that
- the query specifies a language and
- be the text content of the property matches
The result will be:
1) true (match), if the property was stored with a matching xml:lang property (where the language tag matching rules would have to apply)
2) undefined if the property was stored without xml:lang
3) false otherwise
On the other hand if
- the query doesn't specify a language
the result will be:
4) undefined (at least according to the current wording).
So,
1) requires that the query engine actually knows how to match language tags -- I'm not sure that everybody is willing to implement that.
2) is this desirable?
3) ok.
4) that seems to be wrong. If the query doesn't care, it should match, right?
Other problems:
- what is the language of a date-typed property?
- (sic!) where should xml:lang go into the query? There's no XML feature to undefine an xml:lang which is in scope, but there may be cases where this is needed.
On the other hand, if we drop this requirement, a client can still do a query and then process the result set -- the property elements in the response body will be reported with xml:lang (when persisted with language) anyway.
So I'd recommend to drop the feature. Defining string comparisons vs. collation sequences is hard enough. (Proposal to reject) WG meeting feedback: should be moved into explicit operators (see proposal on mailing list). Open: is this optional or required?
<!ELEMENT basicsearch (select, from, where?, orderby?, limit?) > <!ELEMENT select (allprop | prop) > <!ELEMENT from (scope) > <!ELEMENT scope (href, depth) > <!ENTITY %comp_ops "eq | lt | gt| lte | gte"> <!ENTITY %log_ops "and | or | not"> <!ENTITY %special_ops "is-collection | is-defined"> <!ENTITY %string_ops "like"> <!ENTITY %content_ops "contains"> <!ENTITY %all_ops "%comp_ops; | %log_ops; | %special_ops; | %string_ops; | %content_ops;"> <!ELEMENT where ( %all_ops; ) > <!ELEMENT and ( ( %all_ops; ) +) > <!ELEMENT or ( ( %all_ops; ) +) > <!ELEMENT not ( %all_ops; ) > <!ELEMENT lt (prop, literal) > <!ATTLIST lt caseless (yes|no) > <!ELEMENT lte (prop, literal) > <!ATTLIST lte caseless (yes|no) > <!ELEMENT gt (prop, literal) > <!ATTLIST gt caseless (yes|no) > <!ELEMENT gte (prop, literal) > <!ATTLIST gte caseless (yes|no) > <!ELEMENT eq (prop, literal) > <!ATTLIST eq caseless (yes|no) > <!ELEMENT literal (#PCDATA)> <!ELEMENT is-defined (prop) > <!ELEMENT like (prop, literal) > <!ATTLIST like caseless (yes|no) > <!ELEMENT contains (#PCDATA)> <!ELEMENT orderby (order+) > <!ELEMENT order ((prop | score), (ascending | descending)?) <!ATTLIST order caseless (yes|no) > <!ELEMENT ascending EMPTY> <!ELEMENT descending EMPTY> <!ELEMENT limit (nresults) > <!ELEMENT nresults (#PCDATA) >
This query retrieves the content length values for all resources located under the server's "/container1/" URI namespace whose length exceeds 10000.
<d:searchrequest xmlns:d="DAV:"> <d:basicsearch> <d:select> <d:prop><d:getcontentlength/></d:prop> </d:select> <d:from> <d:scope> <d:href>/container1/</d:href> <d:depth>infinity</d:depth> </d:scope> </d:from> <d:where> <d:gt> <d:prop><d:getcontentlength/></d:prop> <d:literal>10000</d:literal> </d:gt> </d:where> <d:orderby> <d:order> <d:prop><d:getcontentlength/></d:prop> <d:ascending/> </d:order> </d:orderby> </d:basicsearch> </d:searchrequest>
DAV:select defines the result record, which is a set of properties and values. This document defines two possible values: DAV:allprop and DAV:prop, both defined in and revised in .
A relatively frequent use case for servers that both support versioning and DASL seems to have searches that include all versions of the resources in scope. In general, the version URIs may not be in the scope of the query. Therefore, I'd like to extend the DAV:scope to specify inclusion of versions. This would be an optional extension -- however, a server that does not support his feature should reject the request (so that the client would know that the request could not be satisfied).

Example: 
    <d:from xmlns:d="DAV:">
      <d:scope>
        <d:href>/container1/</d:href>
        <d:depth>infinity</d:depth>
        <d:include-versions />
      </d:scope>
    </d:from>
just to clarify:
1. If a resource in scope has versions, the server SHOULD take care of versions as well.
2. If the client specifies <d:include-versions />, the server MUST take care of versions or MUST reject the request.
3. If the user does not want to get versions, he must specify <not xmlns="DAV:"><is-defined><version-name /></is-defined></not> ...
Is my understanding correct?
However, a defined "switch" (include - exclude) could be a good hint for the server in terms of performance, so I'd prefer a <d:exclude-versions/> as well. Alternatively the server should only include the versions, if <d:include-versions /> is specified.
Does this make sense? I don't like that, because I'd prefer to keep the definition of "scope" intact. If versions happen to be in the namespace scope, they should be in scope of the search as well. Thus the proposal to add a specific element that *extends* the scope of the query. DAV:from defines the query scope. This contains exactly one DAV:scope element. The scope element contains mandatory DAV:href and DAV:depth elements. DAV:href indicates the URI to use as a scope. When the scope is a collection, if DAV:depth is "0", the search includes only the collection. When it is "1", the search includes the (toplevel) members of the collection. When it is "infinity", the search includes all recursive members of the collection. When the scope is not a collection, the depth is ignored and the search applies just to the resource itself.
If the DAV:scope element is an absolute URI, the scope is exactly that URI. If the DAV:scope element is is an absolute URI reference, the scope is taken to be relative to the request-URI.
A Scope can be an arbitrary URI. Servers, of course, may support only particular scopes. This may include limitations for particular schemes such as "http:" or "ftp:" or certain URI namespaces.
The DAV:where element defines the search condition for inclusion of resources in the result set. The value of this element is an XML element that defines a search operator that evaluates to one of the Boolean truth values TRUE, FALSE, or UNKNOWN. The search operator contained by DAV:where may itself contain and evaluate additional search operators as operands, which in turn may contain and evaluate additional search operators as operands, etc. recursively.
Each operator defined for use in the where clause that returns a Boolean value MUST evaluate to TRUE, FALSE, or UNKNOWN. The resource under scan is included as a member of the result set if and only if the search condition evaluates to TRUE. Consult for details on the application of three-valued logic in query expressions.
If a query contains an operator that is not supported by the server, then the server MUST respond with a 422 (Unprocessable Entity) status code.
If a PROPFIND for a property value would yield a non-2xx (see , section 10.2) response for that property, then that property is considered NULL. NULL values are "less than" all other values in comparisons. Empty strings (zero length strings) are not NULL values. An empty string is "less than" a string with length greater than zero. The DAV:isdefined operator is defined to test if the value of a property is NULL.
Comparisons of properties that do not have simple types (text-only content) is out-of-scope for the standard operators defined for DAV:basicsearch and therefore is defined to be UNKNOWN (as per ). For querying the DAV:resourcetype property, see .
The example shows a single operator (DAV:eq) applied in the criteria.
<d:where> <d:eq> <d:prop> <d:getcontentlength/> </d:prop> <d:literal>100</d:literal> </d:eq> </d:where>
The example shows a more complex operation involving several operators (DAV:and, DAV:eq, DAV:gt) applied in the criteria. This DAV:where expression matches those resources that are "image/gifs" over 4K in size.
<D:where> <D:and> <D:eq> <D:prop> <D:getcontenttype/> </D:prop> <D:literal>image/gif</D:literal> </D:eq> <D:gt> <D:prop> <D:getcontentlength/> </D:prop> <D:literal>4096</D:literal> </D:gt> </D:and> </D:where>
The DAV:orderby element specifies the ordering of the result set. It contains one or more DAV:order elements, each of which specifies a comparison between two items in the result set. Informally, a comparison specifies a test that determines whether one resource appears before another in the result set. Comparisons are applied in the order they occur in the DAV:orderby element, earlier comparisons being more significant. The comparisons defined here use only a single property from each resource, compared using the same ordering as the DAV:lt operator (ascending) or DAV:gt operator (descending). If neither direction is specified, the default is DAV:ascending. In the context of the DAV:orderby element, null values are considered to collate before any actual (i.e., non null) value, including strings of zero length (this is compatible with ).
XPath/XQuery (see draft, and open issue) specify string comparisons based on collations, not languages. I think we should adopt this. This would mean that "xml:lang" would be removed, and an optional attribute specifying the name of the collation is added. Proposal: adopt "lang" and "collation" attribute from XSLT 2.0's xsl:sort. Comparisons on strings take into account the language defined for that property. Clients MAY specify the language using the xml:lang attribute. If no language is specified either by the client or defined for that property by the server or if a comparison is performed on strings of two different languages, the results are undefined. The "caseless" attribute may be used to indicate case-sensitivity for comparisons.
This sort orders first by last name of the author, and then by size, in descending order, so that for each author, the largest works appear first.
<d:orderby> <d:order> <d:prop><r:lastname/></d:prop> <d:ascending/> </d:order> <d:order> <d:prop><d:getcontentlength/></d:prop> <d:descending/> </d:order> </d:orderby>
The DAV:and operator performs a logical AND operation on the expressions it contains. The DAV:or operator performs a logical OR operation on the values it contains. The DAV:not operator performs a logical NOT operation on the values it contains.
The DAV:eq operator provides simple equality matching on property values. The "caseless" attribute may be used with this element.
Define how comparisons on strings work, esp for i18n.
Need policy statement about sort order in various national languages. (JW said "non-Latin" but it's an issue even in languages that use the latin char set.) This issue not only applies to the comparison operators, but also to ordering! The DAV:lt, DAV:lte, DAV:gt, and DAV:gte operators provide comparisons on property values, using less-than, less-than or equal, greater-than, and greater-than or equal respectively. The "caseless" attribute may be used with these elements.
Dates (HTTPDate in getlastmodified). Agreement that it is OK to submit isodate to search HTTPDate (i.e., it's a marshalling issue only). Booleans appear to be underspecified in the specification. How is a boolean tested, and what are the behavior of operators like less than, greater than, etc. I think similar questions apply to booleans. Proposal: allow specification of the literal's type using XML Schema simple types, and declare that "both" WebDAV date types are compatible. The current DASL draft doesn't really have Booleans or any other data type. It's trying to skate on data types. Booleans could be tested using the "eq" and the combination "not eq", if you had well defined literals for TRUE and FALSE. With the current syntax, that is the way you would have to test a Boolean. Generally, Boolean values are not considered to be ordered, so "gt" etc. wouldn't apply. However, if the literal values of a Boolean were 1 and 0 for TRUE and FALSE (using the most commonly used convention of positive logic), then you would have an obvious ordering. 1 and 0 have the advantage of being language independent. You now see a lot of electronic and electro-mechanical devices (air conditioners, computers, etc.) with a "1/0" label on the power switch, "1" meaning "on", and "0" meaning "off".
SQL databases don't have Booleans. SQL doesn't control DASL, of course, but SQL databases are so widely used that they are important. The closest thing in SQL is a bit field. Each bit in a bit field is zero or 1.
So, why not close the issue by saying: DASL doesn't have data types. You can simulate Booleans by an integer data type, using 1 for "TRUE" and 0 for "FALSE". let's consider a dead property "foo", and some resources a, b and c on which this dead property is defined and has the values "1", "3" and "10".
Consider a DAV:basicsearch with the where clause: 
<gte xmlns="DAV:">
  <prop><foo xmlns=""/></prop>
  <literal>3</literal>
</gte>

Which resource will match?
As DAV:basicsearch currently isn't type-aware, the server will have to do a string comparison, and only the b (with value "3") will match.
Is this really sufficient? It basically means that dead property comparisons are restricted to strings.
Proposals:
a) If the server happens to have type information for a dead property, it should try to do a comparison according to the known property type, if the literal can be parsed into this type. This basically replicates the behaviour that a client would expect when querying on live properties such as DAV:getcontentlength, so it could be taken as a simple clarification.
Extended proposal:
b) A client can enforce comparison using a specific data type by specifying the type in the query, for instance using: 
<gte xmlns="DAV:">
  <prop><foo xmlns=""/></prop>
  <literal xsi:type="xs:long">3</literal>
</gte>
What about existing implementations? Currently a server might react with "xsi:type unknown entity" or just ignore it (which would mean: String comparison) OK, how about *adding* an alternative to DAV:literal? Therefore:
DAV:literal: untyped, server can compare according to it's internal knowledge of types (with the clarification above)
DAV:typed-literal: typed according to the xsi:type attribute -- "new" servers can implement this without affecting any existing code.
We'll need to think about discovery of this feature, though. It might be possible to do this with QSD (in the meantime, are there any QSD implementations except ours?) WG meeting feedback: define DAV:typed-literal. Also allow DAV:literal to be evaluated by the server according "internal" type knowledge. Require timestamps to be ISO, even for DAV:getlastmodified. DAV:literal allows literal values to be placed in an expression. White space in literal values is significant in comparisons. For consistency with , clients SHOULD NOT specify the attribute "xml:space" (section 2.10 of ) to override this behaviour. In comparisons, the contents of DAV:literal SHOULD be treated as string, with the following exceptions: when operand for a comparison with a DAV:getcontentlength property, it SHOULD be treated as an integer value (the behaviour for non-integer values is undefined), when operand for a comparison with a DAV:creationdate or DAV:getlastmodified property, it SHOULD be treated as a date value in the ISO-8601 subset defined for the DAV:creationdate property (, section 13.1). when operand for a comparison with a property for which the type is known, it MAY be treated according to this type.
There are situations in which a client may want to force a comparison not to be string-based (as defined for DAV:literal). In these cases, a typed comparison can be enforced by using DAV:typed-literal instead.
<!ELEMENT typed-literal (#PCDATA)>
The data type is specified using the xsi:type attribute defined in , section 2.6.1. If the type is not specified, it defaults to "xs:string". A server MUST reject a request with an unknown type. 1. (insert language defining the comparison following the rules defined in http://www.w3.org/TR/xpath20/#id-comparisons).
2. Extend Basicsearch QSD grammar to support discovery of typed-literal
3. Update DTD.
4. Discuss behaviour of DAV:literal when the property's type is known for the complete search scope (is the server allowed to be "smart"?)
Consider a set of resources with the dead property "edits" in the namespace "http://ns.example.org":
URI property value /a "-1" /b "01" /c "3" /d "test" /e (undefined)
The expression
<lt xmlns="DAV:" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xs="http://www.w3.org/2001/XMLSchema"> <prop><edits xmlns="http://ns.example.org"/></prop> <typed-literal xsi:type="xs:integer">3</typed-literal> </lt>
will evaluate to TRUE for the resources "/a" and "/b" (their property values can be parsed as type xs:number, and the numerical comparison evaluates to true), to FALSE for "/c" (property value is compatible, but numerical comparison evaluates to false) and UNKNOWN fot "/d" and "/e" (the property either is undefined, or its value can not be parsed as xs:number).
The DAV:is-collection operator allows clients to determine whether a resource is a collection (that is, whether it's DAV:resourcetype element contains the element DAV:collection). Rationale: This operator is provided in lieu of defining generic structure queries, which would suffice for this and for many more powerful queries, but seems inappropriate to standardize at this time.
This example shows a search criterion that picks out all and only the resources in the scope that are collections.
<where xmlns="DAV:"> <is-collection/> </where>
The DAV:is-defined operator allows clients to determine whether a property is defined on a resource. The meaning of "defined on a resource" is found in .
Example:<d:is-defined> <d:prop><x:someprop/></d:prop> </d:is-defined>
The DAV:like is an optional operator intended to give simple wildcard-based pattern matching ability to clients. The operator takes two arguments. The first argument is a DAV:prop element identifying a single property to evaluate. The second argument is a DAV:literal element that gives the pattern matching string.
Pattern := [wildcard] 0*( text [wildcard] ) wildcard := exactlyone | zeroormore text := 1*( <character> | escapesequence ) exactlyone : = "_" zeroormore := "%" escapechar := "\" escapesequence := "\" ( exactlyone | zeroormore | escapechar ) character: valid XML characters (see section 2.2 of [XML]), minus ( exactlyone | zeroormore | escapechar )
The value for the literal is composed of wildcards separated by segments of text. Wildcards may begin or end the literal. The "?""_" wildcard matches exactly one character. The "%" wildcard matches zero or more characters The "\" character is an escape sequence so that the literal can include >"?""_" and "%". To include the "\" character in the pattern, the escape sequence "\\" is used.
This example shows how a client might use DAV:like to identify those resources whose content type was a subtype of image.
<D:where> <D:like caseless="yes"> <D:prop><D:getcontenttype/></D:prop> <D:literal>image/%</D:literal> </D:like> </D:where>
The DAV:contains operator is an optional operator that provides content-based search capability. This operator implicitly searches against the text content of a resource, not against content of properties. The DAV:contains operator is intentionally not overly constrained, in order to allow the server to do the best job it can in performing the search. The DAV:contains operator evaluates to a Boolean value. It evaluates to TRUE if the content of the resource satisfies the search. Otherwise, It evaluates to FALSE. Within the DAV:contains XML element, the client provides a phrase: a single word or whitespace delimited sequence of words. Servers MAY ignore punctuation in a phrase. Case-sensitivity is left to the server. The following things may or may not be done as part of the search: Phonetic methods such as "soundex" may or may not be used. Word stemming may or may not be performed. Thesaurus expansion of words may or may not be done. Right or left truncation may or may not be performed. The search may be case insensitive or case sensitive. The word or words may or may not be interpreted as names. Multiple words may or may not be required to be adjacent or "near" each other. Multiple words may or may not be required to occur in the same order. Multiple words may or may not be treated as a phrase. The search may or may not be interpreted as a request to find documents "similar" to the string operand.
Servers SHOULD indicate scores for the DAV:contains condition by adding a DAV:score XML element to the DAV:response element. It's value is defined only in the context of a particular query result. The value is a string representing the score, an integer from zero to 10000 inclusive, where a higher value indicates a higher score (e.g. more relevant).
Modified DTD fragment for DAV:propstat: <!ELEMENT response (href, ((href*, status)|(propstat+)), responsedescription?, score?) > <!ELEMENT score (#PCDATA) >
Clients should note that, in general, it is not meaningful to compare the numeric values of scores from two different query results unless both were executed by the same underlying search system on the same collection of resources.
To order search results by their score, the DAV:score element may be added as child to the DAV:orderby element (in place of a DAV:prop element).
The example below shows a search for the phrase "Peter Forsberg". Depending on its support for content-based searching, a server MAY treat this as a search for documents that contain the words "Peter" and "Forsberg".
<D:where> <D:contains>Peter Forsberg</D:contains> </D:where>
The example below shows a search for resources that contain "Peter" and "Forsberg".
<D:where> <D:and> <D:contains>Peter</D:contains> <D:contains>Forsberg</D:contains> </D:and> </D:where>
<!ELEMENT limit (nresults) > <!ELEMENT nresults (#PCDATA)> ;only digits
The DAV:limit XML element contains requested limits from the client to limit the size of the reply or amount of effort expended by the server. The DAV:nresults XML element contains a requested maximum number of DAV:response elements to be returned in the response body. The server MAY disregard this limit. The value of this element is an integer.
If the result set is both limited by DAV:limit and ordered according to DAV:orderby, the results that are included in the response document must be those that order highest.
The "caseless" attribute allows clients to specify caseless matching behaviour instead of character-by-character matching for DAV:basicsearch operators. The possible values for "caseless" are "yes" or "no". The default value is server-specified. Caseless matching SHOULD be implemented as defined in . Support for the "caseless" attribute is optional. A server should respond with a status of 422 if it is used but cannot be supported.
The DAV:basicsearch grammar defines a search criteria that is a Boolean-valued expression, and allows for an arbitrary set of properties to be included in the result record. The result set may be sorted on a set of property values. Accordingly the DTD for schema discovery for this grammar allows the server to express: the set of properties that may be either searched, returned, or used to sort, and a hint about the data type of such properties the set of optional operators defined by the resource.
<!ELEMENT basicsearchschema (properties, operators)> <!ELEMENT any-other-property EMPTY> <!ELEMENT properties (propdesc*)> <!ELEMENT propdesc (prop|any-other-property), datatype?, searchable?, selectable?, sortable?, caseless?)> <!ELEMENT operators (opdesc*)> <!ELEMENT opdesc ANY> <!ELEMENT operand-literal EMPTY> <!ELEMENT operand-property EMPTY>
The DAV:properties element holds a list of descriptions of properties. The DAV:operators element describes the optional operators that may be used in a DAV:where element.
Each instance of a DAV:propdesc element describes the property or properties in the DAV:prop element it contains. All subsequent elements are descriptions that apply to those properties. All descriptions are optional and may appear in any order. Servers SHOULD support all the descriptions defined here, and MAY define others. DASL defines five descriptions. The first, DAV:datatype, provides a hint about the type of the property value, and may be useful to a user interface prompting for a value. The remaining four (DAV:searchable, DAV:selectable, DAV:sortable, and DAV:caseless) identify portions of the query (DAV:where, DAV:select, and DAV:orderby, respectively). If a property has a description for a section, then the server MUST allow the property to be used in that section. These descriptions are optional. If a property does not have such a description, or is not described at all, then the server MAY still allow the property to be used in the corresponding section.
This element can be used in place of DAV:prop to describe properties of WebDAV properties not mentioned in any other DAV:prop element. For instance, this can be used to indicate that all other properties are searchable and selectable without giving details about their types (a typical scenario for dead properties).
The DAV:datatype element contains a single XML element that provides a hint about the domain of the property, which may be useful to a user interface prompting for a value to be used in a query. Datatypes are identified by an element name. Where appropriate, a server SHOULD use the simple datatypes defined in .
<!ELEMENT datatype ANY >
Examples from , section 3:
Qualified name Example xs:boolean true, false, 1, 0 xs:string Foobar xs:dateTime 1994-11-05T08:15:5Z xs:float .314159265358979E+1 xs:integer -259, 23
If the data type of a property is not given, then the data type defaults to xs:string.
<!ELEMENT searchable EMPTY>
If this element is present, then the server MUST allow this property to appear within a DAV:where element where an operator allows a property. Allowing a search does not mean that the property is guaranteed to be defined on every resource in the scope, it only indicates the server's willingness to check.
<!ELEMENT selectable EMPTY>
This element indicates that the property may appear in the DAV:select element.
This element indicates that the property may appear in the DAV:orderby element.
<!ELEMENT sortable EMPTY>
This element only applies to properties whose data type is "xs:string" and derived data types as per the DAV:datatype property description. Its presence indicates that compares performed for searches, and the comparisons for ordering results on the string property will be caseless (the default is character-by-character).
<!ELEMENT caseless EMPTY>
The DAV:operators element describes every optional operator supported in a query. (Mandatory operators are not listed since they are mandatory and permit no variation in syntax.). All optional operators that are supported MUST be listed in the DAV:operators element. The listing for an operator consists of the operator (as an empty element), followed by one element for each operand. The operand MUST be either DAV:operand-property or DAV:operand-literal, which indicate that the operand in the corresponding position is a property or a literal value, respectively. If an operator is polymorphic (allows more than one operand syntax) then each permitted syntax MUST be listed separately.
<operators xmlns='DAV:'> <opdesc> <like/><operand-property/><operand-literal/> </opdesc> </operators>
<D:basicsearchschema xmlns:D="DAV:" xmlns:xs="http://www.w3.org/2001/XMLSchema""> <D:properties> <D:propdesc> <D:prop><D:getcontentlength/></D:prop> <D:datatype><xs:nonNegativeInteger/></D:datatype> <D:searchable/><D:selectable/><D:sortable/> </D:propdesc> <D:propdesc> <D:prop><D:getcontenttype/><D:displayname/></D:prop> <D:searchable/><D:selectable/><D:sortable/> </D:propdesc> <D:propdesc> <D:prop><fstop xmlns="http://jennicam.org"/></D:prop> <D:selectable/> </D:propdesc> <D:propdesc> <D:any-other-property/> <D:searchable/><D:selectable/> </D:propdesc> </D:properties> <D:operators> <D:opdesc> <D:like/><D:operand-property/><D:operand-literal/> </D:opdesc> </D:operators> </D:basicsearchschema>
This response lists four properties. The datatype of the last three properties is not given, so it defaults to xs:string. All are selectable, and the first three may be searched. All but the last may be used in a sort. Of the optional DAV operators, DAV:isdefined and DAV:like are supported. Note: The schema discovery defined here does not provide for discovery of supported values of the "caseless" attribute. This may require that the reply also list the mandatory operators.
Clients have the opportunity to tag properties when they are stored in a language. The server SHOULD read this language-tagging by examining the xml:lang attribute on any properties stored on a resource. The xml:lang attribute specifies a nationalized collation sequence when properties are compared. Comparisons when this attribute differs have undefined order.
This section is provided to detail issues concerning security implications of which DASL applications need to be aware. All of the security considerations of HTTP/1.1 also apply to DASL. In addition, this section will include security risks inherent in searching and retrieval of resource properties and content. A query must not allow one to retrieve information about values or existence of properties that one could not obtain via PROPFIND. (e.g. by use in DAV:orderby, or in expressions on properties.) A server should prepare for denial of service attacks. For example a client may issue a query for which the result set is expensive to calculate or transmit because many resources match or must be evaluated. 7.1 Implications of XML External Entities XML supports a facility known as "external entities", defined in section 4.2.2 of , which instruct an XML processor to retrieve and perform an inline include of XML located at a particular URI. An external XML entity can be used to append or modify the document type declaration (DTD) associated with an XML document. An external XML entity can also be used to include XML within the content of an XML document. For non-validating XML, such as the XML used in this specification, including an external XML entity is not required by . However, does state that an XML processor may, at its discretion, include the external XML entity. External XML entities have no inherent trustworthiness and are subject to all the attacks that are endemic to any HTTP GET request. Furthermore, it is possible for an external XML entity to modify the DTD, and hence affect the final form of an XML document, in the worst case significantly modifying its semantics, or exposing the XML processor to the security risks discussed in . Therefore, implementers must be aware that external XML entities should be treated as untrustworthy. There is also the scalability risk that would accompany a widely deployed application which made use of external XML entities. In this situation, it is possible that there would be significant numbers of requests for one external XML entity, potentially overloading any server which fields requests for the resource containing the external XML entity.
Query grammars are identified by URIs. Applications SHOULD not attempt to retrieve these URIs even if they appear to be retrievable (for example, those that begin with "http://")
Authentication mechanisms defined in WebDAV will also apply to DASL.
This document uses the namespace defined by for XML elements. All other IANA considerations mentioned in are also applicable to DASL.
To be supplied.
To be supplied.
This draft has benefited from thoughtful discussion by Lisa Dusseault, Sung Kim, Elias Sinderson, Martin Wallmer and Jim Whitehead.
Hypertext Transfer Protocol -- HTTP/1.1 University of California, Irvine, Information and Computer Science
Irvine CA 92697-3425 US +1 949 824 1715 fielding@ics.uci.edu
 World Wide Web Consortium, MIT Laboratory for Computer Science
545 Technology Square Cambridge MA 02139 US +1 617 258 8682 jg@w3.org
 Compaq Computer Corporation, Western Research Laboratory
250 University Avenue Palo Alto CA 94301 US mogul@wrl.dec.com
 World Wide Web Consortium, MIT Laboratory for Computer Science
545 Technology Square Cambridge MA 02139 US +1 617 258 8682 frystyk@w3.org
 Xerox Corporation
3333 Coyote Hill Road Palo Alto CA 94034 US masinter@parc.xerox.com
 Microsoft Corporation
1 Microsoft Way Redmond WA 98052 US paulle@microsoft.com
 World Wide Web Consortium, MIT Laboratory for Computer Science
545 Technology Square Cambridge MA 02139 US +1 617 258 8682 timbl@w3.org
 Key words for use in RFCs to Indicate Requirement Levels Harvard University
1350 Mass. Ave. Cambridge MA 02138 - +1 617 495 3864 -
 General keyword Extensible Markup Language (XML) 1.0 (2nd ed) Textuality and Netscape
tbray@textuality.com
Microsoft
jeanpa@microsoft.com
University of Illinois at Chicago and Text Encoding Initiative
cmsmcq@uic.edu
Sun Microsystems
eve.maler@east.sun.com
Namespaces in XML Textuality
tbray@textuality.com
Hewlett-Packard Company
dmh@corp.hp.com
Microsoft
andrewl@microsoft.com
XML Schema Part 1: Structures University of Edinburgh
ht@cogsci.ed.ac.uk
 Oracle
David.Beech@oracle.com
 (for) Commerce One
murray@muzmo.com
 Lotus Development Corporation
Noah_Mendelsohn@lotus.com
 World Wide Web Consortium
MIT Laboratory for Computer Science 545 Technology Square Cambridge MA 02139 US + 1 617 253 2613 + 1 617 258 5999 timbl@w3.org http://www.w3c.org
XML Schema Part 2: Datatypes Kaiser Permanente, for Health Level Seven
Paul.V.Biron@kp.org
 Microsoft, formerly of IBM
ashokma@microsoft.com
 World Wide Web Consortium
MIT Laboratory for Computer Science 545 Technology Square Cambridge MA 02139 US + 1 617 253 2613 + 1 617 258 5999 timbl@w3.org http://www.w3c.org
HTTP Extensions for Distributed Authoring -- WEBDAV Microsoft Corporation
yarong@microsoft.com
 Dept. Of Information and Computer Science, University of California, Irvine
ejw@ics.uci.edu
 Netscape
asad@netscape.com
 Novell
srcarter@novell.com
 Novell
dcjensen@novell.com
 Versioning Extensions to WebDAV Rational Software
geoffrey.clemm@rational.com
 IBM
jamsden@us.ibm.com
 IBM
tim_ellison@uk.ibm.com
 Microsoft
ckaler@microsoft.com
 UC Santa Cruz, Dept. of Computer Science
ejw@cse.ucsc.edu
 WebDAV Access Control Protocol Rational Software
geoffrey.clemm@rational.com
 Microsoft Corporation
annehop@microsoft.com
 Oracle Corporation
esedlar@us.oracle.com
 UC Santa Cruz, Dept. of Computer Science
ejw@cse.ucsc.edu
 XML Media Types IBM Tokyo Research Laboratory
mmurata@trl.ibm.co.jp
 simonstl.com
simonstl@simonstl.com
 Skymoon Ventures
dan@dankohn.com
 Database Language SQL Part 2: Foundation (SQL/Foundation) International Organization for Standardization Case Mappings IBM
mark.davis@us.ibm.com
 Requirements for DAV Searching and Locating CourseNet Systems
170 Capp Street San FranciscoCA94110 jrd3@alum.mit.edu
Microsoft
One Microsoft Way RedmondWA9085-6933 saveenr@microsoft.com
Xerox Corporation
800 Phillips Road 128-29E slein@wrc.xerox.com
Binding Extensions to WebDAV Rational Software
20 Maguire Road Lexington MA 02421 US geoffrey.clemm@rational.com
IBM Research
P.O. Box 704 Yorktown HeightsNY10598 ccjason@us.ibm.com
greenbytes GmbH
Salzmannstrasse 152 MuensterNW48159 Germany +49 251 2807760 +49 251 2807761 julian.reschke@greenbytes.de http://greenbytes.de/tech/webdav/
Xerox Corporation
800 Phillips Road, 105-50C WebsterNY14580 jslein@crt.xerox.com
UC Santa Cruz, Dept. of Computer Science
1156 High Street Santa Cruz CA 95064 US ejw@cse.ucsc.edu
DAV Searching & Locating Microsoft
One Microsoft Way RedmondWA9085-6933 saveenr@microsoft.com
Novell
1555 N. Technology Way, M/S ORM-M-314 OremUT84097 dlowry@novell.com
Oracle Corporation
600 Oracle Parkway, M/S 6op3 RedwoodshoresCA94065 +1 650 506 5441 skreddy@us.oracle.com
Netscape
rickh@netscape.com
Intelligent Markets
410 Jessie Street 6th floor San FranciscoCA94103 jrd3@alum.mit.edu
Filenet
3565 Harbor Blvd. Costa MesaCA92626 +1 714 966 3403 ababich@filenet.com
ANSI standard three valued logic is used when evaluating the search condition (as defined in the ANSI standard SQL specifications, for example in ANSI X3.135-1992, section 8.12, pp. 188-189, section 8.2, p. 169, General Rule 1)a), etc.). ANSI standard three valued logic is undoubtedly the most widely practiced method of dealing with the issues of properties in the search condition not having a value (e.g., being null or not defined) for the resource under scan, and with undefined expressions in the search condition (e.g., division by zero, etc.). Three valued logic works as follows. Undefined expressions are expressions for which the value of the expression is not defined. Undefined expressions are a completely separate concept from the truth value UNKNOWN, which is, in fact, well defined. Property names and literal constants are considered expressions for purposes of this section. If a property in the current resource under scan has not been set to a value, then the value of that property is undefined for the resource under scan. DASL 1.0 has no arithmetic division operator, but if it did, division by zero would be an undefined arithmetic expression. If any subpart of an arithmetic, string, or datetime subexpression is undefined, the whole arithmetic, string, or datetime subexpression is undefined. There are no manifest constants to explicitly represent undefined number, string, or datetime values. Since a Boolean value is ultimately returned by the search condition, arithmetic, string, and datetime expressions are always arguments to other operators. Examples of operators that convert arithmetic, string, and datetime expressions to Boolean values are the six relational operators ("greater than", "less than", "equals", etc.). If either or both operands of a relational operator have undefined values, then the relational operator evaluates to UNKNOWN. Otherwise, the relational operator evaluates to TRUE or FALSE, depending upon the outcome of the comparison. The Boolean operators DAV:and, DAV:or and DAV:not are evaluated according to the following rules: UNKNOWN and UNKNOWN = UNKNOWN UNKNOWN or UNKNOWN = UNKNOWN not UNKNOWN = UNKNOWN UNKNOWN and TRUE = UNKNOWN UNKNOWN and FALSE = FALSE UNKNOWN and UNKNOWN = UNKNOWN UNKNOWN or TRUE = TRUE UNKNOWN or FALSE = UNKNOWN UNKNOWN or UNKNOWN = UNKNOWN
Initial Draft Referring to DASL as an extension to HTTP/1.1 rather than DAV. Added new sections "Notational Conventions", "Protocol Model", "Security Considerations". Changed section 3 to "Elements of Protocol". Added some stuff to introduction. Added "result set" terminology. Added "IANA Considerations". Moved sub-headings of "Elements of Protocol" to first level and removed "Elements of Protocol" Heading. Added an sentence in introduction explaining that this is a "sketch" of a protocol. Added orderby, data typing, three valued logic, query schema property, and element definitions for schema for basicsearch. - made changes based on last week's DASL BOF. Removed most of DAV:searcherror; converted to DAV:searchredirect Altered DAV:basicsearch grammar to use avoid use of ANY in DTD -Added details on Query Schema Discovery -Shortened list of data types moved data types before change history rewrote the data types section removed the casesensitive element and replace with the casesensitive attribute added the casesensitive attribute to the DTD for all operations that might work on a string A series of changes. See Author's meeting minutes for details. Changes as per author's meeting. QSD uses SEARCH, not PROPFIND. Moved text around to keep concepts nearby. Boolean literals are 1 and 0, not T and F. contains changed to contentspassthrough. Renamed rank to score. Added Dale Lowry as Author Added 422 as response when query lists unimplemented operators. DAV:literal declares a default value for xml:space, 'preserve' (see XML spec, section 2.10) moved to new XML namespace syntax Changed "simplesearch" to "basicsearch" Changed isnull to isdefined Defined NULLness as having a 404 or 403 response used ENTITY syntax in DTD Added redirect Fixed a series of typographical and formatting errors. Modified the section of three-valued logic to use a table rather than a text description of the role of UNKNOWN in expressions. Added the DAV:contains operator. Removed the DAV:contentpassthrough operator. Various author comments for submission Cosmetic and minor editorial changes only. Fix nits reported by Jim Whitehead in email of April 26, 1999. Converted to HTML from Word 97, manually. Removed redirection feature, since 301/302 suffices. Removed Query Schema Discovery (former chapter 4). Everyone agrees this is a useful feature, but it is apparently too difficult to define at this time, and it is not essential for DASL.
Added Julian Reschke as author. Chapter about QSD re-added. Formatted into RFC2629-compliant XML document. Added first comments. ID version number kicked up to draft-dasl-protocol-03. Updated address information for Jim Davis. Added issue of datatype vocabularies. Updated issue descriptions for grammar discovery, added issues on query schema DTD. Fixed typos in XML examples. Re-introduced split between normative and non-normative references. Version bumbed up to 04. Started work on resolving the issues identified in the previous version. Fixed some XML typos. Closed issues naming-of-elements. Fixed query search DTD and added option to discover properties of "other" (non-listed) properties. Changed into private submission and added reference to historic DASL draft. Marked reference to DASL requirements non-normative. Updated reference to latest deltav spec. Added feedback from and updated contact info for Alan Babich. Included open issues collected in http://www.webdav.org/dasl/protocol/issues.html. Made sure that all artwork fits into 72 characters wide text. Changed Insufficient storage handling (multistatus). Moved is-collection to operators and added to DTD. Made scope/depth mandatory. Updated reference to SQL99. "Non-normative References" -> "Informative References". Abstract updated. Consistently specify a charset when using text/xml (no change bars). Do not attempt to define PROPFIND's entity encoding (take out specific references to text/xml). Remove irrelevant headers (Connection:) from examples (no change bars). Added issue on querying based on DAV:href. Updated introduction to indicate relationship to DASL draft. Updated HTTP reference from RFC2068 to RFC2616. Updated XML reference to XML 1.0 2nd edition. Removed superfluous namespace decl in 2.4.2. Reopened JW14 and suggest to drop xml:space support. Removed "xml:space" feature on DAV:literal. Added issue about string comparison vs. collations vs. xml:lang. Updated some of the open issues with details from JimW's original mail in April 1999. Resolved scope vs relative URI references. Resolved issues about DAV:ascending (added to index) and the BNF for DAV:like (changed "octets" to "characters"). Updated reference to DeltaV (now RFC3253). Added Martin Wallmer's comments, moved JW5 into DAV:basicsearch section. Closed open issues regaring the type of search arbiters (JW3) and their discovery (JW9). Rephrased requirements on multistatus response bodies (propstat only if properties were selected, removed requirement for responsedescription). RFC2376 -> RFC3023. Added missing first names of authors. OPTIONS added to example for DAV:supported-method-set.
Abstract doesn't refer to DASL WG anymore. Fixed section title (wrong property name supported-search-grammar-set. Changed DAV:casesensitve to "casesensitive" (it wasn't in the DAV: namespace after all). Updated some issues with Jim Davis's comments. Added proposal for different method for query schema discovery, not using pseudo-properties. QSD marshalling rewritten. Added issue "isdefined-optional".
Added issue "scope-collection". Closed issue "scope-collection". Added issues "results-vs-binds" and "select-allprop". Added issue "undefined-expressions". Changed example host names (no change tracking). Updated issue "DB2/DB7". Closed issues "undefined expressions", "isdefined-optional" and "select-allprop".
Added issues "undefined-properties", "like-exactlyone" and "like-wildcard-adjacent". Closed issue "query-on-href". Added acknowledgments section. Closed issue "like-exactlyone". Added issue "mixed-content-properties". Closed issues "undefined-properties", "results-vs-binds", "mixed-content-properties". Updated issue "like-wildcard-adjacent". Added informative reference to BIND draft. Updated reference to ACL draft. Removed duplicate section on invalid scopes. Added comments to some open issues. Closed issues JW25/26, score-pseudo-property and null-ordering. Issue limit-vs-ordering plus resolution. Closed issue JW17/JW24b. New issue order-precedence. Started resolution of DB2/DB7. Started spec of DAV:typed-literal. Fix one DAV:like/DAV:getcontenttype example (add / to like expression, make case-insensitive). Update issue(s) result-truncation, JW24d. Fixed response headers in OPTIONS example. Added issue qsd-optional. Closed issue(s) order-precedence, case-insensitivity-name. Added issue scope-vs-versions. score-pseudo-property: allow DAV:orderby to explicitly specify DAV:score.
Fixed two "?" vs "_" issues (not updated in last draft). Improve index.