HTTPbis Working GroupR. Fielding, Editor
Internet-DraftAdobe
Obsoletes: 2616 (if approved)J. Reschke, Editor
Updates: 2617 (if approved)greenbytes
Intended status: Standards TrackNovember 17, 2013
Expires: May 21, 2014

Hypertext Transfer Protocol (HTTP/1.1): Authentication

Abstract

The Hypertext Transfer Protocol (HTTP) is an application-level protocol for distributed, collaborative, hypermedia information systems. This document defines the HTTP Authentication framework.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress”.

This Internet-Draft will expire on May 21, 2014.

Copyright Notice

Copyright (c) 2013 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.

Editorial Note (To be removed by RFC Editor)

Discussion of this draft takes place on the HTTPBIS working group mailing list (ietf-http-wg@w3.org), which is archived at <http://lists.w3.org/Archives/Public/ietf-http-wg/>.

The current issues list is at <http://tools.ietf.org/wg/httpbis/trac/report/3> and related documents (including fancy diffs) can be found at <http://tools.ietf.org/wg/httpbis/>.

The changes in this draft are summarized in Appendix D.1.


1. Introduction

This document defines HTTP/1.1 access control and authentication. It includes the relevant parts of RFC 2616 with only minor changes ([RFC2616]), plus the general framework for HTTP authentication, as previously defined in "HTTP Authentication: Basic and Digest Access Authentication" ([RFC2617]).

HTTP provides several OPTIONAL challenge-response authentication schemes that can be used by a server to challenge a client request and by a client to provide authentication information. The "basic" and "digest" authentication schemes continue to be specified in RFC 2617.

1.1. Conformance and Error Handling

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

Conformance criteria and considerations regarding error handling are defined in Section 2.5 of [Part1].

1.2. Syntax Notation

This specification uses the Augmented Backus-Naur Form (ABNF) notation of [RFC5234] with the list rule extension defined in Section 7 of [Part1]. Appendix B describes rules imported from other documents. Appendix C shows the collected ABNF with the list rule expanded.

2. Access Authentication Framework

2.1. Challenge and Response

HTTP provides a simple challenge-response authentication framework that can be used by a server to challenge a client request and by a client to provide authentication information. It uses a case-insensitive token as a means to identify the authentication scheme, followed by additional information necessary for achieving authentication via that scheme. The latter can either be a comma-separated list of parameters or a single sequence of characters capable of holding base64-encoded information.

Parameters are name-value pairs where the name is matched case-insensitively, and each parameter name MUST only occur once per challenge.

  auth-scheme    = token
  
  auth-param     = token BWS "=" BWS ( token / quoted-string )

  token68        = 1*( ALPHA / DIGIT /
                       "-" / "." / "_" / "~" / "+" / "/" ) *"=" 

The "token68" syntax allows the 66 unreserved URI characters ([RFC3986]), plus a few others, so that it can hold a base64, base64url (URL and filename safe alphabet), base32, or base16 (hex) encoding, with or without padding, but excluding whitespace ([RFC4648]).

The 401 (Unauthorized) response message is used by an origin server to challenge the authorization of a user agent. This response MUST include a WWW-Authenticate header field containing at least one challenge applicable to the requested resource.

The 407 (Proxy Authentication Required) response message is used by a proxy to challenge the authorization of a client and MUST include a Proxy-Authenticate header field containing at least one challenge applicable to the proxy for the requested resource.

A user agent that wishes to authenticate itself with an origin server — usually, but not necessarily, after receiving a 401 (Unauthorized) — can do so by including an Authorization header field with the request.

A client that wishes to authenticate itself with a proxy — usually, but not necessarily, after receiving a 407 (Proxy Authentication Required) — can do so by including a Proxy-Authorization header field with the request.

Both the Authorization field value and the Proxy-Authorization field value contain the client's credentials for the realm of the resource being requested, based upon a challenge received in a response (possibly at some point in the past). When creating their values, the user agent ought to do so by selecting the challenge with what it considers to be the most secure auth-scheme that it understands, obtaining credentials from the user as appropriate.

Upon receipt of a request for a protected resource that omits credentials, contains invalid credentials (e.g., a bad password) or partial credentials (e.g., when the authentication scheme requires more than one round trip), an origin server SHOULD send a 401 (Unauthorized) response that contains a WWW-Authenticate header field with at least one (possibly new) challenge applicable to the requested resource.

Likewise, upon receipt of a request that requires authentication by proxies that omit credentials or contain invalid or partial credentials, a proxy SHOULD send a 407 (Proxy Authentication Required) response that contains a Proxy-Authenticate header field with a (possibly new) challenge applicable to the proxy.

A server receiving credentials that are valid, but not adequate to gain access, ought to respond with the 403 (Forbidden) status code (Section 6.5.3 of [Part2]).

HTTP does not restrict applications to this simple challenge-response framework for access authentication. Additional mechanisms can be used, such as authentication at the transport level or via message encapsulation, and with additional header fields specifying authentication information. However, such additional mechanisms are not defined by this specification.

A proxy MUST forward the WWW-Authenticate and Authorization header fields unmodified and follow the rules found in Section 4.1.

2.2. Protection Space (Realm)

The authentication parameter realm is reserved for use by authentication schemes that wish to indicate the scope of protection.

A protection space is defined by the canonical root URI (the scheme and authority components of the effective request URI; see Section 5.5 of [Part1]) of the server being accessed, in combination with the realm value if present. These realms allow the protected resources on a server to be partitioned into a set of protection spaces, each with its own authentication scheme and/or authorization database. The realm value is a string, generally assigned by the origin server, which can have additional semantics specific to the authentication scheme. Note that a response can have multiple challenges with the same auth-scheme but different realms.

The protection space determines the domain over which credentials can be automatically applied. If a prior request has been authorized, the user agent MAY reuse the same credentials for all other requests within that protection space for a period of time determined by the authentication scheme, parameters, and/or user preferences (such as a configurable inactivity timeout). Unless specifically allowed by the authentication scheme, a single protection space cannot extend outside the scope of its server.

For historical reasons, a sender MUST only generate the quoted-string syntax. Recipients might have to support both token and quoted-string syntax for maximum interoperability with existing clients that have been accepting both notations for a long time.

3. Status Code Definitions

3.1. 401 Unauthorized

The 401 (Unauthorized) status code indicates that the request has not been applied because it lacks valid authentication credentials for the target resource. The origin server MUST send a WWW-Authenticate header field (Section 4.4) containing at least one challenge applicable to the target resource. If the request included authentication credentials, then the 401 response indicates that authorization has been refused for those credentials. The user agent MAY repeat the request with a new or replaced Authorization header field (Section 4.1). If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user agent SHOULD present the enclosed representation to the user, since it usually contains relevant diagnostic information.

3.2. 407 Proxy Authentication Required

The 407 (Proxy Authentication Required) status code is similar to 401 (Unauthorized), but indicates that the client needs to authenticate itself in order to use a proxy. The proxy MUST send a Proxy-Authenticate header field (Section 4.2) containing a challenge applicable to that proxy for the target resource. The client MAY repeat the request with a new or replaced Proxy-Authorization header field (Section 4.3).

4. Header Field Definitions

This section defines the syntax and semantics of HTTP/1.1 header fields related to authentication.

4.1. Authorization

The "Authorization" header field allows a user agent to authenticate itself with an origin server — usually, but not necessarily, after receiving a 401 (Unauthorized) response. Its value consists of credentials containing the authentication information of the user agent for the realm of the resource being requested.

If a request is authenticated and a realm specified, the same credentials are presumed to be valid for all other requests within this realm (assuming that the authentication scheme itself does not require otherwise, such as credentials that vary according to a challenge value or using synchronized clocks).

See Section 3.2 of [Part6] for details of and requirements pertaining to handling of the Authorization field by HTTP caches.

4.2. Proxy-Authenticate

The "Proxy-Authenticate" header field consists of at least one challenge that indicates the authentication scheme(s) and parameters applicable to the proxy for this effective request URI (Section 5.5 of [Part1]). It MUST be included as part of a 407 (Proxy Authentication Required) response.

Unlike WWW-Authenticate, the Proxy-Authenticate header field applies only to the next outbound client on the response chain that chose to direct its request to the responding proxy. If that recipient is also a proxy, it will generally consume the Proxy-Authenticate header field (and generate an appropriate Proxy-Authorization in a subsequent request) rather than forward the header field to its own outbound clients. However, if a recipient proxy needs to obtain its own credentials by requesting them from a further outbound client, it will generate its own 407 response, which might have the appearance of forwarding the Proxy-Authenticate header field if both proxies use the same challenge set.

Note that the parsing considerations for WWW-Authenticate apply to this header field as well; see Section 4.4 for details.

4.3. Proxy-Authorization

The "Proxy-Authorization" header field allows the client to identify itself (or its user) to a proxy that requires authentication. Its value consists of credentials containing the authentication information of the client for the proxy and/or realm of the resource being requested.

Unlike Authorization, the Proxy-Authorization header field applies only to the next inbound proxy that demanded authentication using the Proxy-Authenticate field. When multiple proxies are used in a chain, the Proxy-Authorization header field is consumed by the first inbound proxy that was expecting to receive credentials. A proxy MAY relay the credentials from the client request to the next proxy if that is the mechanism by which the proxies cooperatively authenticate a given request.

4.4. WWW-Authenticate

The "WWW-Authenticate" header field consists of at least one challenge that indicates the authentication scheme(s) and parameters applicable to the effective request URI (Section 5.5 of [Part1]).

It MUST be included in 401 (Unauthorized) response messages and MAY be included in other response messages to indicate that supplying credentials (or different credentials) might affect the response.

User agents are advised to take special care in parsing the field value, as it might contain more than one challenge, and each challenge can contain a comma-separated list of authentication parameters. Furthermore, the header field itself can occur multiple times.

For instance:

  WWW-Authenticate: Newauth realm="apps", type=1,
                    title="Login to \"apps\"", Basic realm="simple"

This header field contains two challenges; one for the "Newauth" scheme with a realm value of "apps", and two additional parameters "type" and "title", and another one for the "Basic" scheme with a realm value of "simple".

5. IANA Considerations

5.1. Authentication Scheme Registry

The HTTP Authentication Scheme Registry defines the name space for the authentication schemes in challenges and credentials. It will be created and maintained at (the suggested URI) <http://www.iana.org/assignments/http-authschemes>.

5.1.1. Procedure

Registrations MUST include the following fields:

  • Authentication Scheme Name
  • Pointer to specification text
  • Notes (optional)

Values to be added to this name space require IETF Review (see [RFC5226], Section 4.1).

5.1.2. Considerations for New Authentication Schemes

There are certain aspects of the HTTP Authentication Framework that put constraints on how new authentication schemes can work:

  • HTTP authentication is presumed to be stateless: all of the information necessary to authenticate a request MUST be provided in the request, rather than be dependent on the server remembering prior requests. Authentication based on, or bound to, the underlying connection is outside the scope of this specification and inherently flawed unless steps are taken to ensure that the connection cannot be used by any party other than the authenticated user (see Section 2.3 of [Part1]).

  • The authentication parameter "realm" is reserved for defining Protection Spaces as defined in Section 2.2. New schemes MUST NOT use it in a way incompatible with that definition.

  • The "token68" notation was introduced for compatibility with existing authentication schemes and can only be used once per challenge or credential. New schemes thus ought to use the "auth-param" syntax instead, because otherwise future extensions will be impossible.

  • The parsing of challenges and credentials is defined by this specification, and cannot be modified by new authentication schemes. When the auth-param syntax is used, all parameters ought to support both token and quoted-string syntax, and syntactical constraints ought to be defined on the field value after parsing (i.e., quoted-string processing). This is necessary so that recipients can use a generic parser that applies to all authentication schemes.

    Note: The fact that the value syntax for the "realm" parameter is restricted to quoted-string was a bad design choice not to be repeated for new parameters.

  • Definitions of new schemes ought to define the treatment of unknown extension parameters. In general, a "must-ignore" rule is preferable over "must-understand", because otherwise it will be hard to introduce new parameters in the presence of legacy recipients. Furthermore, it's good to describe the policy for defining new parameters (such as "update the specification", or "use this registry").

  • Authentication schemes need to document whether they are usable in origin-server authentication (i.e., using WWW-Authenticate), and/or proxy authentication (i.e., using Proxy-Authenticate).

  • The credentials carried in an Authorization header field are specific to the User Agent, and therefore have the same effect on HTTP caches as the "private" Cache-Control response directive (Section 5.2.2.6 of [Part6]), within the scope of the request they appear in.

    Therefore, new authentication schemes that choose not to carry credentials in the Authorization header field (e.g., using a newly defined header field) will need to explicitly disallow caching, by mandating the use of either Cache-Control request directives (e.g., "no-store", Section 5.2.1.5 of [Part6]) or response directives (e.g., "private").

5.2. Status Code Registration

The HTTP Status Code Registry located at <http://www.iana.org/assignments/http-status-codes> shall be updated with the registrations below:

ValueDescriptionReference
401UnauthorizedSection 3.1
407Proxy Authentication RequiredSection 3.2

5.3. Header Field Registration

HTTP header fields are registered within the Message Header Field Registry maintained at <http://www.iana.org/assignments/message-headers/message-header-index.html>.

This document defines the following HTTP header fields, so their associated registry entries shall be updated according to the permanent registrations below (see [BCP90]):

Header Field NameProtocolStatusReference
AuthorizationhttpstandardSection 4.1
Proxy-AuthenticatehttpstandardSection 4.2
Proxy-AuthorizationhttpstandardSection 4.3
WWW-AuthenticatehttpstandardSection 4.4

The change controller is: "IETF (iesg@ietf.org) - Internet Engineering Task Force".

6. Security Considerations

This section is meant to inform developers, information providers, and users of known security concerns specific to HTTP/1.1 authentication. More general security considerations are addressed in HTTP messaging [Part1] and semantics [Part2].

6.1. Authentication Credentials and Idle Clients

Existing HTTP clients and user agents typically retain authentication information indefinitely. HTTP does not provide a mechanism for the origin server to direct clients to discard these cached credentials, since the protocol has no awareness of how credentials are obtained or managed by the user agent. The mechanisms for expiring or revoking credentials can be specified as part of an authentication scheme definition.

Circumstances under which credential caching can interfere with the application's security model include but are not limited to:

  • Clients that have been idle for an extended period, following which the server might wish to cause the client to re-prompt the user for credentials.
  • Applications that include a session termination indication (such as a "logout" or "commit" button on a page) after which the server side of the application "knows" that there is no further reason for the client to retain the credentials.

User agents that cache credentials are encouraged to provide a readily accessible mechanism for discarding cached credentials under user control.

6.2. Protection Spaces

Authentication schemes that solely rely on the "realm" mechanism for establishing a protection space will expose credentials to all resources on an origin server. Clients that have successfully made authenticated requests with a resource can use the same authentication credentials for other resources on the same origin server. This makes it possible for a different resource to harvest authentication credentials for other resources.

This is of particular concern when an origin server hosts resources for multiple parties under the same canonical root URI (Section 2.2). Possible mitigation strategies include restricting direct access to authentication credentials (i.e., not making the content of the Authorization request header field available), and separating protection spaces by using a different host name (or port number) for each party.

7. Acknowledgments

This specification takes over the definition of the HTTP Authentication Framework, previously defined in RFC 2617. We thank John Franks, Phillip M. Hallam-Baker, Jeffery L. Hostetler, Scott D. Lawrence, Paul J. Leach, Ari Luotonen, and Lawrence C. Stewart for their work on that specification. See Section 6 of [RFC2617] for further acknowledgements.

See Section 10 of [Part1] for the Acknowledgments related to this document revision.

8. References

8.1. Normative References

[Part1]
Fielding, R., Ed. and J. Reschke, Ed., “Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing”, Internet-Draft draft-ietf-httpbis-p1-messaging-25 (work in progress), November 2013.
[Part2]
Fielding, R., Ed. and J. Reschke, Ed., “Hypertext Transfer Protocol (HTTP/1.1): Semantics and Content”, Internet-Draft draft-ietf-httpbis-p2-semantics-25 (work in progress), November 2013.
[Part6]
Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke, Ed., “Hypertext Transfer Protocol (HTTP/1.1): Caching”, Internet-Draft draft-ietf-httpbis-p6-cache-25 (work in progress), November 2013.
[RFC2119]
Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels”, BCP 14, RFC 2119, March 1997.
[RFC5234]
Crocker, D., Ed. and P. Overell, “Augmented BNF for Syntax Specifications: ABNF”, STD 68, RFC 5234, January 2008.

8.2. Informative References

[BCP90]
Klyne, G., Nottingham, M., and J. Mogul, “Registration Procedures for Message Header Fields”, BCP 90, RFC 3864, September 2004.
[RFC2616]
Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1”, RFC 2616, June 1999.
[RFC2617]
Franks, J., Hallam-Baker, P., Hostetler, J., Lawrence, S., Leach, P., Luotonen, A., and L. Stewart, “HTTP Authentication: Basic and Digest Access Authentication”, RFC 2617, June 1999.
[RFC3986]
Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax”, STD 66, RFC 3986, January 2005.
[RFC4648]
Josefsson, S., “The Base16, Base32, and Base64 Data Encodings”, RFC 4648, October 2006.
[RFC5226]
Narten, T. and H. Alvestrand, “Guidelines for Writing an IANA Considerations Section in RFCs”, BCP 26, RFC 5226, May 2008.

Appendix A. Changes from RFCs 2616 and 2617

The framework for HTTP Authentication is now defined by this document, rather than RFC 2617.

The "realm" parameter is no longer always required on challenges; consequently, the ABNF allows challenges without any auth parameters. (Section 2)

The "token68" alternative to auth-param lists has been added for consistency with legacy authentication schemes such as "Basic". (Section 2)

This specification introduces the Authentication Scheme Registry, along with considerations for new authentication schemes. (Section 5.1)

Appendix B. Imported ABNF

The following core rules are included by reference, as defined in Appendix B.1 of [RFC5234]: ALPHA (letters), CR (carriage return), CRLF (CR LF), CTL (controls), DIGIT (decimal 0-9), DQUOTE (double quote), HEXDIG (hexadecimal 0-9/A-F/a-f), LF (line feed), OCTET (any 8-bit sequence of data), SP (space), and VCHAR (any visible US-ASCII character).

The rules below are defined in [Part1]:

  BWS           = <BWS, defined in [Part1], Section 3.2.3>
  OWS           = <OWS, defined in [Part1], Section 3.2.3>
  quoted-string = <quoted-string, defined in [Part1], Section 3.2.6>
  token         = <token, defined in [Part1], Section 3.2.6>

Appendix C. Collected ABNF

In the collected ABNF below, list rules are expanded as per Section 1.2 of [Part1].

Authorization = credentials

BWS = <BWS, defined in [Part1], Section 3.2.3>

OWS = <OWS, defined in [Part1], Section 3.2.3>

Proxy-Authenticate = *( "," OWS ) challenge *( OWS "," [ OWS
 challenge ] )
Proxy-Authorization = credentials

WWW-Authenticate = *( "," OWS ) challenge *( OWS "," [ OWS challenge
 ] )

auth-param = token BWS "=" BWS ( token / quoted-string )
auth-scheme = token

challenge = auth-scheme [ 1*SP ( token68 / [ ( "," / auth-param ) *(
 OWS "," [ OWS auth-param ] ) ] ) ]
credentials = auth-scheme [ 1*SP ( token68 / [ ( "," / auth-param )
 *( OWS "," [ OWS auth-param ] ) ] ) ]

quoted-string = <quoted-string, defined in [Part1], Section 3.2.6>

token = <token, defined in [Part1], Section 3.2.6>
token68 = 1*( ALPHA / DIGIT / "-" / "." / "_" / "~" / "+" / "/" )
 *"="

Appendix D. Change Log (to be removed by RFC Editor before publication)

Changes up to the IETF Last Call draft are summarized in <http://trac.tools.ietf.org/html/draft-ietf-httpbis-p7-auth-24#appendix-D>.

D.1. Since draft-ietf-httpbis-p7-auth-24

Closed issues:

Index

4 A B C G P R W

Authors' Addresses

Roy T. Fielding (editor)
Adobe Systems Incorporated
345 Park Ave
San Jose, CA 95110
USA
Email: fielding@gbiv.com
URI: http://roy.gbiv.com/
Julian F. Reschke (editor)
greenbytes GmbH
Hafenweg 16
Muenster, NW 48155
Germany
Email: julian.reschke@greenbytes.de
URI: http://greenbytes.de/tech/webdav/