HTTP Working Group M. Nottingham Internet-Draft Fastly Intended status: Standards Track P. Sikora Expires: February 17, 2022 Google August 16, 2021 The Proxy-Status HTTP Response Header Field draft-ietf-httpbis-proxy-status-06 Abstract This document defines the Proxy-Status HTTP field to convey the details of intermediary response handling, including generated errors. Note to Readers _RFC EDITOR: please remove this section before publication_ Discussion of this draft takes place on the HTTP working group mailing list (ietf-http-wg@w3.org), which is archived at https://lists.w3.org/Archives/Public/ietf-http-wg/ [1]. Working Group information can be found at https://httpwg.org/ [2]; source code and issues list for this draft can be found at https://github.com/httpwg/http-extensions/labels/proxy-status [3]. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on February 17, 2022. Nottingham & Sikora Expires February 17, 2022 [Page 1] Internet-Draft Proxy-Status August 2021 Copyright Notice Copyright (c) 2021 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. 1. Introduction HTTP intermediaries -- including both forward proxies and gateways (also known as "reverse proxies") -- have become an increasingly significant part of HTTP deployments. In particular, reverse proxies and Content Delivery Networks (CDNs) form part of the critical infrastructure of many Web sites. Typically, HTTP intermediaries forward requests towards the origin server and then forward their responses back to clients. However, if an error occurs before a response is obtained from upstream, the response is often generated by the intermediary itself. HTTP accommodates these types of errors with a few status codes; for example, 502 Bad Gateway and 504 Gateway Timeout. However, experience has shown that more information is necessary to aid debugging and communicate what's happened to the client. Additionally, intermediaries sometimes want to convey additional information about their handling of a response, even if they did not generate it. To enable these uses, Section 2 defines a new HTTP response field to allow intermediaries to convey details of their handling of a response. Section 2.1 enumerates the information that can be added to the field by intermediaries, which can be extended as per Section 2.2. Section 2.3 defines a set of error types for use when a proxy encounters an issue when obtaining a response for the request; these can likewise be extended as per Section 2.4. Nottingham & Sikora Expires February 17, 2022 [Page 2] Internet-Draft Proxy-Status August 2021 1.1. Notational Conventions The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here. This specification uses Structured Fields [RFC8941] to specify syntax and parsing, and ABNF [RFC5234] as a shorthand for that syntax. The terms sf-list, sf-item, sf-string, sf-token, sf-integer and key refer to the structured types defined therein. Note that in this specification, "proxy" is used to indicate both forward and reverse proxies, otherwise known as gateways. "Next hop" indicates the connection in the direction leading to the origin server for the request. 2. The Proxy-Status HTTP Field The Proxy-Status HTTP response field allows an intermediary to convey additional information about its handling of a response and its associated request. It is a List ([RFC8941], Section 3.1): Proxy-Status = sf-list Each member of the list represents an intermediary that has handled the response. The first member of the list represents the intermediary closest to the origin server, and the last member of the list represents the intermediary closest to the user agent. For example: Proxy-Status: FooProxy, ExampleCDN indicates that this response was handled first by FooProxy (a reverse proxy adjacent to the origin server) and then ExampleCDN. Intermediaries determine when it is appropriate to add the Proxy- Status field to a response. Some might decide to append to it to all responses, whereas others might only do so when specifically configured to, or when the request contains a header that activates a debugging mode. Each member of the list identifies the intermediary that inserted the value, and MUST have a type of either sf-string or sf-token. Nottingham & Sikora Expires February 17, 2022 [Page 3] Internet-Draft Proxy-Status August 2021 Depending on the deployment, this might be a product or service name (e.g., ExampleProxy or "Example CDN"), a hostname ("proxy- 3.example.com"), an IP address, or a generated string. Parameters on each member convey additional information about that intermediary's handling of the response and its associated request; see Section 2.1. While all of these parameters are OPTIONAL, intermediaries are encouraged to provide as much information as possible (but see Section 4 for security considerations in doing so). When adding a value to the Proxy-Status field, intermediaries SHOULD preserve the existing members of the field, to allow debugging of the entire chain of intermediaries handling the request. Proxy-Status MAY be sent in HTTP trailers. For example, if an intermediary is streaming a response and the upstream connection suddenly terminates, Proxy-Status can only be appended to the trailers of the outgoing message, since the headers have already been sent. As with all trailers, it might be silently discarded along the path to the user agent, so this SHOULD NOT be done unless it is not possible to send it in headers, and an intermediary MUST NOT send Proxy-Status as a trailer field unless it has also sent a corresponding Proxy-Status header field in the same message, so that the trailer value's ordering relative to other intermediaries is preserved. Origin servers MUST NOT generate the Proxy-Status field. 2.1. Proxy-Status Parameters This section lists parameters that can be used on the members of the Proxy-Status field. Unrecognised parameters MUST be ignored. 2.1.1. error The "error" parameter's value is an sf-token that is a Proxy Error Type. When present, it indicates that the proxy encountered an issue when obtaining a response. Unless a Proxy Error Type specifies otherwise, the presences of error often, but not always, indicates that response was generated by the proxy, not the origin server or any other upstream server. For example, a proxy might attempt to correct an error, or part of a response might be forwarded before the error is encountered. Section 2.3 lists the Proxy Error Types defined in this document; new ones can be defined using the procedure outlined in Section 2.4. Nottingham & Sikora Expires February 17, 2022 [Page 4] Internet-Draft Proxy-Status August 2021 For example: HTTP/1.1 504 Gateway Timeout Proxy-Status: SomeCDN; error=connection_timeout indicates that this 504 response was generated by SomeCDN, due to a connection timeout when going forward. Or: HTTP/1.1 429 Too Many Requests Proxy-Status: SomeReverseProxy; error=http_request_error indicates that this 429 Too Many Requests response was generated by the intermediary, not the origin. When sending the error parameter, the most specific Proxy Error Type SHOULD be sent, provided that it accurately represents the error condition. If an appropriate Proxy Error Type is not defined, there are a number of generic error types (e.g., proxy_internal_error, http_protocol_error) that can be used. If they are not suitable, consider registering a new Proxy Error Type (see Section 2.4). Each Proxy Error Type has a Recommended HTTP Status Code. When generating a HTTP response containing "error", its HTTP status code SHOULD be set to the Recommended HTTP Status Code. However, there may be circumstances (e.g., for backwards compatibility with previous behaviours, a status code has already been sent) when another status code might be used. Proxy Error Types can also define any number of extra parameters for use with that type. Their use, like all parameters, is optional. As a result, if an extra parameter is used with a Proxy Error Type for which it is not defined, it will be ignored. 2.1.2. next-hop The "next-hop" parameter's value is an sf-string or sf-token that identifies the intermediary or origin server selected (and used, if contacted) for this response. It might be a hostname, IP address, or alias. For example: Proxy-Status: cdn.example.org; next-hop=backend.example.org Nottingham & Sikora Expires February 17, 2022 [Page 5] Internet-Draft Proxy-Status August 2021 2.1.3. next-protocol The "next-protocol" parameter's value indicates the ALPN protocol identifier [RFC7301] used by the intermediary to connect to the next hop. This is only applicable when that connection was actually established. The value MUST be either an sf-token or sf-binary, representing a TLS Application-Layer Protocol Negotiation (ALPN) Protocol ID (see https://www.iana.org/assignments/tls-extensiontype-values/tls- extensiontype-values.xhtml#alpn-protocol-ids [4]). If the protocol identifier is able to be expressed as an sf-token using ASCII encoding, that form MUST be used. For example: Proxy-Status: "proxy.example.org"; next-protocol=h2 2.1.4. received-status The "received-status" parameter's value indicates the HTTP status code that the intermediary received from the next hop server. The value MUST be an sf-integer. For example: Proxy-Status: ExampleProxy; received-status=200 2.1.5. details The "details" parameter's value is an sf-string containing additional information not captured anywhere else. This can include implementation-specific or deployment-specific information. For example: Proxy-Status: ExampleProxy; error="http_protocol_error"; details="Malformed response header - space before colon" 2.2. Defining New Proxy-Status Parameters New Proxy-Status Parameters can be defined by registering them in the HTTP Proxy-Status Parameters registry. Registration requests are reviewed and approved by Expert Review, as per [RFC8126], Section 4.5. A specification document is appreciated, but not required. Nottingham & Sikora Expires February 17, 2022 [Page 6] Internet-Draft Proxy-Status August 2021 The Expert(s) should consider the following factors when evaluating requests: o Community feedback o If the value is sufficiently well-defined o Generic parameters are preferred over vendor-specific, application-specific or deployment-specific values. If a generic value cannot be agreed upon in the community, the parameter's name should be correspondingly specific (e.g., with a prefix that identifies the vendor, application or deployment). o Parameter names should not conflict with registered extra parameters in the Proxy Error Type Registry. Registration requests should use the following template: o Name: [a name for the Proxy-Status Parameter that matches key] o Description: [a description of the parameter semantics and value] o Reference: [to a specification defining this parameter; optional] See the registry at https://iana.org/assignments/http-proxy-status [5] for details on where to send registration requests. 2.3. Proxy Error Types This section lists the Proxy Error Types defined by this document. See Section 2.4 for information about defining new Proxy Error Types. Note that implementations might not produce all Proxy Error Types. The set of types below is designed to map to existing states in implementations, and so may not be applicable to some. 2.3.1. DNS Timeout o Name: dns_timeout o Description: The intermediary encountered a timeout when trying to find an IP address for the next hop hostname. o Extra Parameters: None. o Recommended HTTP status code: 504 o Reference: [this document] Nottingham & Sikora Expires February 17, 2022 [Page 7] Internet-Draft Proxy-Status August 2021 2.3.2. DNS Error o Name: dns_error o Description: The intermediary encountered a DNS error when trying to find an IP address for the next hop hostname. o Extra Parameters: * rcode: A sf-string conveying the DNS RCODE that indicates the error type. See [RFC8499], Section 3. * info-code: A sf-integer conveying the Extended DNS Error Code info-code. See [RFC8914]. o Recommended HTTP status code: 502 o Reference: [this document] 2.3.3. Destination Not Found o Name: destination_not_found o Description: The intermediary cannot determine the appropriate next hop to use for this request; for example, it may not be configured. Note that this error is specific to gateways, which typically require specific configuration to identify the "backend" server; forward proxies use in-band information to identify the origin server. o Extra Parameters: None. o Recommended HTTP status code: 500 o Reference: [this document] 2.3.4. Destination Unavailable o Name: destination_unavailable o Description: The intermediary considers the next hop to be unavailable; e.g., recent attempts to communicate with it may have failed, or a health check may indicate that it is down. o Extra Parameters: None. o Recommended HTTP status code: 503 Nottingham & Sikora Expires February 17, 2022 [Page 8] Internet-Draft Proxy-Status August 2021 o Reference: [this document] 2.3.5. Destination IP Prohibited o Name: destination_ip_prohibited o Description: The intermediary is configured to prohibit connections to the next hop IP address. o Extra Parameters: None. o Recommended HTTP status code: 502 o Reference: [this document] 2.3.6. Destination IP Unroutable o Name: destination_ip_unroutable o Description: The intermediary cannot find a route to the next hop IP address. o Extra Parameters: None. o Recommended HTTP status code: 502 o Reference: [this document] 2.3.7. Connection Refused o Name: connection_refused o Description: The intermediary's connection to the next hop was refused. o Extra Parameters: None. o Recommended HTTP status code: 502 o Reference: [this document] 2.3.8. Connection Terminated o Name: connection_terminated o Description: The intermediary's connection to the next hop was closed before complete response was received. Nottingham & Sikora Expires February 17, 2022 [Page 9] Internet-Draft Proxy-Status August 2021 o Extra Parameters: None. o Recommended HTTP status code: 502 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. 2.3.9. Connection Timeout o Name: connection_timeout o Description: The intermediary's attempt to open a connection to the next hop timed out. o Extra Parameters: None. o Recommended HTTP status code: 504 o Reference: [this document] 2.3.10. Connection Read Timeout o Name: connection_read_timeout o Description: The intermediary was expecting data on a connection (e.g., part of a response), but did not receive any new data in a configured time limit. o Extra Parameters: None. o Recommended HTTP status code: 504 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. 2.3.11. Connection Write Timeout o Name: connection_write_timeout o Description: The intermediary was attempting to write data to a connection, but was not able to (e.g., because its buffers were full). o Extra Parameters: None. Nottingham & Sikora Expires February 17, 2022 [Page 10] Internet-Draft Proxy-Status August 2021 o Recommended HTTP status code: 504 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. 2.3.12. Connection Limit Reached o Name: connection_limit_reached o Description: The intermediary is configured to limit the number of connections it has to the next hop, and that limit has been passed. o Extra Parameters: None. o Recommended HTTP status code: 503 o Reference: [this document] 2.3.13. TLS Protocol Error o Name: tls_protocol_error o Description: The intermediary encountered a TLS error when communicating with the next hop, either during handshake or afterwards. o Extra Parameters: None. o Recommended HTTP status code: 502 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. Note that additional information about the error can be recorded in the details parameter (as is the case for all errors). 2.3.14. TLS Certificate Error o Name: tls_certificate_error o Description: The intermediary encountered an error when verifying the certificate presented by the next hop. Nottingham & Sikora Expires February 17, 2022 [Page 11] Internet-Draft Proxy-Status August 2021 o Extra Parameters: None. o Recommended HTTP status code: 502 o Reference: [this document] Note that additional information about the error can be recorded in the details parameter (as is the case for all errors). 2.3.15. TLS Alert Received o Name: tls_alert_received o Description: The intermediary received a TLS alert from the next hop. o Extra Parameters: * alert-id: an sf-integer containing the applicable value from the TLS Alerts registry. See {!RFC8446}}. * alert-message: an sf-token containing the applicable description string from the TLS Alerts registry. See [RFC8446]. o Recommended HTTP status code: 502 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. 2.3.16. HTTP Request Error o Name: http_request_error o Description: The intermediary is generating a client (4xx) response on the origin's behalf. Applicable status codes include (but are not limited to) 400, 403, 405, 406, 408, 411, 413, 414, 415, 416, 417, 429. o Extra Parameters: * status-code: an sf-integer containing the generated status code. * status-phrase: an sf-string containing the generated status phrase. Nottingham & Sikora Expires February 17, 2022 [Page 12] Internet-Draft Proxy-Status August 2021 o Recommended HTTP status code: The applicable 4xx status code o Reference: [this document] o Notes: This type helps distinguish between responses generated by intermediaries from those generated by the origin. 2.3.17. HTTP Request Denied o Name: http_request_denied o Description: The intermediary rejected the HTTP request based on its configuration and/or policy settings. The request wasn't forwarded to the next hop. o Extra Parameters: None. o Recommended HTTP status code: 403 o Reference: [this document] 2.3.18. HTTP Incomplete Response o Name: http_response_incomplete o Description: The intermediary received an incomplete response to the request from the next hop. o Extra Parameters: None. o Recommended HTTP status code: 502 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. 2.3.19. HTTP Response Header Section Too Large o Name: http_response_header_section_size o Description: The intermediary received a response to the request whose header section was considered too large. o Extra Parameters: * header-section-size: an sf-integer indicating how large the headers received were. Note that they might not be complete; Nottingham & Sikora Expires February 17, 2022 [Page 13] Internet-Draft Proxy-Status August 2021 i.e., the intermediary may have discarded or refused additional data. o Recommended HTTP status code: 502 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. 2.3.20. HTTP Response Header Too Large o Name: http_response_header_size o Description: The intermediary received a response to the request containing an individual header line that was considered too large. o Extra Parameters: * header-name: an sf-string indicating the name of the header that triggered the error. * header-size: an sf-integer indicating the size of the header that triggered the error. o Recommended HTTP status code: 502 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. 2.3.21. HTTP Response Body Too Large o Name: http_response_body_size o Description: The intermediary received a response to the request whose body was considered too large. o Extra Parameters: * body-size: an sf-integer indicating how large the body received was. Note that it may not have been complete; i.e., the intermediary may have discarded or refused additional data. o Recommended HTTP status code: 502 Nottingham & Sikora Expires February 17, 2022 [Page 14] Internet-Draft Proxy-Status August 2021 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. 2.3.22. HTTP Response Trailer Section Too Large o Name: http_response_trailer_section_size o Description: The intermediary received a response to the request whose trailer section was considered too large. o Extra Parameters: * trailer-section-size: an sf-integer indicating how large the trailers received were. Note that they might not be complete; i.e., the intermediary may have discarded or refused additional data. o Recommended HTTP status code: 502 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. 2.3.23. HTTP Response Trailer Too Large o Name: http_response_trailer_size o Description: The intermediary received a response to the request containing an individual trailer line that was considered too large. o Extra Parameters: * trailer-name: an sf-string indicating the name of the trailer that triggered the error. * trailer-size: an sf-integer indicating the size of the trailer that triggered the error. o Recommended HTTP status code: 502 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. Nottingham & Sikora Expires February 17, 2022 [Page 15] Internet-Draft Proxy-Status August 2021 2.3.24. HTTP Response Transfer-Coding Error o Name: http_response_transfer_coding o Description: The intermediary encountered an error decoding the transfer-coding of the response. o Extra Parameters: * coding: an sf-token containing the specific coding that caused the error. o Recommended HTTP status code: 502 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. 2.3.25. HTTP Response Content-Coding Error o Name: http_response_content_coding o Description: The intermediary encountered an error decoding the content-coding of the response. o Extra Parameters: * coding: an sf-token containing the specific coding that caused the error. o Recommended HTTP status code: 502 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. 2.3.26. HTTP Response Timeout o Name: http_response_timeout o Description: The intermediary reached a configured time limit waiting for the complete response. o Extra Parameters: None. o Recommended HTTP status code: 504 Nottingham & Sikora Expires February 17, 2022 [Page 16] Internet-Draft Proxy-Status August 2021 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. 2.3.27. HTTP Upgrade Failed o Name: http_upgrade_failed o Description: The HTTP Upgrade between the intermediary and the next hop failed. o Extra Parameters: None. o Recommended HTTP status code: 502 o Reference: [this document] 2.3.28. HTTP Protocol Error o Name: http_protocol_error o Description: The intermediary encountered a HTTP protocol error when communicating with the next hop. This error should only be used when a more specific one is not defined. o Extra Parameters: None. o Recommended HTTP status code: 502 o Reference: [this document] o Notes: Responses with this error type might not have been generated by the intermediary. Note that additional information about the error can be recorded in the details parameter (as is the case for all errors). 2.3.29. Proxy Internal Response o Name: proxy_internal_response o Description: The intermediary generated the response locally, without attempting to connect to the next hop (e.g. in response to a request to a debug endpoint terminated at the intermediary). o Extra Parameters: None. Nottingham & Sikora Expires February 17, 2022 [Page 17] Internet-Draft Proxy-Status August 2021 o Recommended HTTP status code: The most appropriate status code for the response o Reference: [this document] 2.3.30. Proxy Internal Error o Name: proxy_internal_error o Description: The intermediary encountered an internal error unrelated to the origin. o Extra Parameters: None o Recommended HTTP status code: 500 o Reference: [this document] Note that additional information about the error can be recorded in the details parameter (as is the case for all errors). 2.3.31. Proxy Configuration Error o Name: proxy_configuration_error o Description: The intermediary encountered an error regarding its configuration. o Extra Parameters: None o Recommended HTTP status code: 500 o Reference: [this document] Note that additional information about the error can be recorded in the details parameter (as is the case for all errors). 2.3.32. Proxy Loop Detected o Name: proxy_loop_detected o Description: The intermediary tried to forward the request to itself, or a loop has been detected using different means (e.g. [RFC8586]). o Extra Parameters: None. o Recommended HTTP status code: 502 Nottingham & Sikora Expires February 17, 2022 [Page 18] Internet-Draft Proxy-Status August 2021 o Reference: [this document] 2.4. Defining New Proxy Error Types New Proxy Error Types can be defined by registering them in the HTTP Proxy Error Types registry. Registration requests are reviewed and approved by Expert Review, as per [RFC8126], Section 4.5. A specification document is appreciated, but not required. The Expert(s) should consider the following factors when evaluating requests: o Community feedback o If the value is sufficiently well-defined o Generic types are preferred over vendor-specific, application- specific or deployment-specific values. If a generic value cannot be agreed upon in the community, the types's name should be correspondingly specific (e.g., with a prefix that identifies the vendor, application or deployment). o Extra Parameters should not conflict with registered Proxy-Status parameters. Registration requests should use the following template: o Name: [a name for the Proxy Error Type that matches sf-token] o Description: [a description of the conditions that generate the Proxy Error Type] o Extra Parameters: [zero or more optional parameters, along with their allowable type(s)] o Recommended HTTP status code: [the appropriate HTTP status code for this entry] o Reference: [to a specification defining this error type; optional] o Notes: [optional] If the Proxy Error Type might occur in responses that are not generated by the intermediary -- for example, when the error is detected during response content processing and a Proxy-Status trailer field is appended -- that SHOULD be explained in the Notes. Nottingham & Sikora Expires February 17, 2022 [Page 19] Internet-Draft Proxy-Status August 2021 See the registry at https://iana.org/assignments/http-proxy-status [6] for details on where to send registration requests. 3. IANA Considerations Upon publication, please create the HTTP Proxy-Status Parameters registry and the HTTP Proxy Error Types registry at https://iana.org/assignments/http-proxy-status [7] and populate them with the types defined in Section 2.1 and Section 2.3 respectively; see Section 2.2 and Section 2.4 for its associated procedures. 4. Security Considerations One of the primary security concerns when using Proxy-Status is leaking information that might aid an attacker. For example, information about the intermediary's configuration and back-end topology can be exposed. As a result, care needs to be taken when deciding to generate a Proxy-Status field. Note that intermediaries are not required to generate a Proxy-Status field in any response, and can conditionally generate them based upon request attributes (e.g., authentication tokens, IP address). Likewise, generation of all parameters is optional. 5. References 5.1. Normative References [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, . [RFC7301] Friedl, S., Popov, A., Langley, A., and E. Stephan, "Transport Layer Security (TLS) Application-Layer Protocol Negotiation Extension", RFC 7301, DOI 10.17487/RFC7301, July 2014, . [RFC8126] Cotton, M., Leiba, B., and T. Narten, "Guidelines for Writing an IANA Considerations Section in RFCs", BCP 26, RFC 8126, DOI 10.17487/RFC8126, June 2017, . [RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC 2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174, May 2017, . Nottingham & Sikora Expires February 17, 2022 [Page 20] Internet-Draft Proxy-Status August 2021 [RFC8446] Rescorla, E., "The Transport Layer Security (TLS) Protocol Version 1.3", RFC 8446, DOI 10.17487/RFC8446, August 2018, . [RFC8499] Hoffman, P., Sullivan, A., and K. Fujiwara, "DNS Terminology", BCP 219, RFC 8499, DOI 10.17487/RFC8499, January 2019, . [RFC8914] Kumari, W., Hunt, E., Arends, R., Hardaker, W., and D. Lawrence, "Extended DNS Errors", RFC 8914, DOI 10.17487/RFC8914, October 2020, . [RFC8941] Nottingham, M. and P-H. Kamp, "Structured Field Values for HTTP", RFC 8941, DOI 10.17487/RFC8941, February 2021, . 5.2. Informative References [RFC5234] Crocker, D., Ed. and P. Overell, "Augmented BNF for Syntax Specifications: ABNF", STD 68, RFC 5234, DOI 10.17487/RFC5234, January 2008, . [RFC8586] Ludin, S., Nottingham, M., and N. Sullivan, "Loop Detection in Content Delivery Networks (CDNs)", RFC 8586, DOI 10.17487/RFC8586, April 2019, . 5.3. URIs [1] https://lists.w3.org/Archives/Public/ietf-http-wg/ [2] https://httpwg.org/ [3] https://github.com/httpwg/http-extensions/labels/proxy-status [4] https://www.iana.org/assignments/tls-extensiontype-values/tls- extensiontype-values.xhtml#alpn-protocol-ids [5] https://iana.org/assignments/http-proxy-status [6] https://iana.org/assignments/http-proxy-status [7] https://iana.org/assignments/http-proxy-status Nottingham & Sikora Expires February 17, 2022 [Page 21] Internet-Draft Proxy-Status August 2021 Authors' Addresses Mark Nottingham Fastly Prahran, VIC Australia Email: mnot@mnot.net URI: https://www.mnot.net/ Piotr Sikora Google Email: piotrsikora@google.com Nottingham & Sikora Expires February 17, 2022 [Page 22]